Code 5 Cast Lead - 760mm x 6m 
FloPlast Half Round Gutter Union, White 
Freeflow Round 112mm Gutter System 135° - White 
Thompson's One Coat Concrete Seal - 5L 
Soudal PU Plasterboard Adhesive - Genius Gun 
Code 4 Cast Lead - 600mm x 6m 
Soudal Orange Skeleton Gun - Up to 310ml 
Bond It Barrier Tape Yellow and Black - 70mm x 500M 
ALM Code 5 Milled Lead - 1000mm x 6m 
Ronseal Exterior Yacht Varnish - Satin 1L 
Everbuild Opti-Mix 3-in-1 Render Additive – 1 Litre 
OB41 Fast Tack Contact Adhesive Spray - 500ml 
Bond It Drive Alive Tarmac Restorer - 4 Litres 
OX Trade Medium Red Carpenters Pencils - Pack of 10 
Timloc 1204 Underfloor Vent Vertical Extension + 150mm 
Soudal 140 LQ Contact Adhesive – 5 Litre 
Hambleside Danelaw Single Pantile Roof Tile Vent, TV10/8 - Black (Box of 5) 
Bond It Patio Blaster - Clear 2.5L 
Everbuild EB25 Ultimate Sealant & Adhesive – Clear 300ml (Box of 12) 
Uses
The Salt-Away by Everbuild is a unique, high-quality formula that combats unsightly marks left when salt evaporates from surfaces, leaving white marks and efflorescence. It's formulated using a special, non-hydrochloric acid, which is safer to handle and for organic life.
Issues that can occur if you leave this untreated can lead to corrosive damage and structural damage to some surfaces.
Preparation
Use a stiff brush to wipe the surface, removing any surface dirt or debris.
Application
- Dampen the surface you intend to apply this to
- Apply the Salt-Away to the surface, ensuring that you apply thorough, even coverage.
- Allow it to sit on the surface for 5-10 minutes, depending on levels of efflorescence.
- Wash the surface down thoroughly using clean water
- If the efflorescence is still present, repeat the application
Limitations
- Always test in a small, inconspicuous area to ensure surface compatibility.
- Do not use on artificially coloured stone, pavers or blocks.
- Any accidents, spillages or oversprays must be washed off immediately using clean water.
