Timco FirmaHold Collated Brad A2 Stainless Steel Nails - 16G x 38mm (2000 Pieces) 
FloPlast Square Line Pipe Connector White 
Samac Snowguard - 225mm x 2m 
Code 7 Cast Lead - 390mm x 3m 
Ronseal Stays White Ultra Tough White Matt Paint - 750ML 
OX Pro Dry Wall External Corner Trowel - 100mm x 125mm 
FloPlast Round 92½° Bend - White 
Timco Hazard Tape 
Code 3 Cast Lead - 600mm x 6m 
Code 5 Cast Lead - 240mm x 6m 
ALM Code 3 Milled Lead - 360mm x 6m 
Soudal Mitre Kit 50g + 200ml - Clear (Box of 12) 
ALM Code 8 Milled Lead - 1200mm x 3m 
Code 6 Cast Lead - 180mm x 3m 
Timco Twin-Cut C2 Floor-Fix Screws - 4.2mm x 55mm (Tub of 250) 
Lead Hall Fixing Clips - Pack of 50 
Hambleside Danelaw TV15/1 Flush Fitting Tile Vent - Brown (Box of 5) 
Armatool Mop Heads Size 12 
Klober Single Pantile Vent - Brown KG9860-0247 (Box of 10) 
Everbuild Stick2 Hard Plastic Adhesive - 30ml 
Ronseal Multi Purpose Smooth Finish Filler - 330g 
Everbuild Pro Blue Masking Tape - 25mm x 33mm 
Bond It Rain-Mate All Weather Sealant Black EU3 - Box of 12 
Everbuild Wood Filler Hardener / Catalyst - 40g 
FloPlast Half Round Union Unit - White 
Soudal Neutral Stay Fresh Sanitary Silicone Sealant – Clear 300ml (Box of 12) 
Soudal Repair Express Cement – Grey 900ml 
Uses
Stick2 All Purpose Clear Adhesive by Everbuild is excellent for bonding various surfaces together, and it can be used for most common household surfaces. However, it also includes;
- Ceramics
- Porcelain
- Wood
- Card
- Paper
- Most Plastics
- Leather
- Cork
- Linoleum
- Rubber
- Stone
- Glass
- Metals
- Dense fabric
Preparation
Ensure you prepare the surface before application; this is to optimise adhesion. Complete this by removing contaminants that can hinder the adhesion, such as dust, oil, grease etc.
Application
Porous Surface:
- Unscrew the cap and spread a thin, even adhesive layer onto one of the surfaces.
- Bring the surfaces together and hold them firmly.
Non-Porous Surface:
- Improve adhesion by abrading both surfaces with sandpaper
- Unscrew the cap and spread a thin, even layer of adhesive onto both surfaces
- Allow adhesive to dry to a tough tacky finish (5 - 10 minutes), then press firmly on both surfaces.
With both types of surfaces, the full strength of this adhesive is achieved within 24 hours with the temperature at 20°C
Limitations
- Will not stick polyethene, polypropylene or PTFE
- This product is not suitable for bonding acetate, rayon or items which contain a hot fluid
- Do not use this product near polish or some painted surfaces
- Do not apply this product to an area which is immersed in water
- This product is unsuitable for bitumen, asphalt, or cellulose-painted surfaces.
