ALM Code 6 Milled Lead Flashing - 150mm x 6m 
Everbuild Weather Mate Gap Filler & Adhesive - Black 295ml (Box of 25) 
Freeflow 68mm Round Gutter Drain Pipe 112° Branch - Black 
Klober Profile-Line Twin Plain Tile Vent - Brown KG9861-0247 (Box of 10) 
Code 3 Cast Lead - 760mm x 3m 
Code 5 Cast Lead - 390mm x 3m 
Soudal Fix ALL Flexi – Black 290ml (Box of 12) 
Bond It Monster Water Resistant Tape - 48mm x 11m (Black) 
Cromar Roof Felt Adhesive - Black 1 Litre 
ALM Code 4 Milled Lead - 1200mm x 6m 
Soudal Lead Sheet Sealant 290ml - Grey (Box of 12) 
Everbuild Multi-Use Giant Wonder Wipes Tub (300 Wipes) 
Everbuild Firefoam B1 Gun Grade Expanding Foam - Pink 750ml 
Bond It Dustproof & Hardener - Clear 5L 
Everbuild Bath & Kitchen Sealant - 200ml 
ALM Code 3 Milled Lead - 360mm x 6m 
Bond It High Gloss Block Sealer - Clear 5L 
Code 7 Cast Lead - 180mm x 3m 
Code 6 Cast Lead - 450mm x 6m 
Timco Lithium EP2 Grease - 400g 
Soudal Repair Express Cement – Grey 290ml (Box of 12) 
Easy-Trim Ridge F Universal Dry Ridge System - 6m Kit 
Uses
Stick2 All Purpose Clear Adhesive by Everbuild is excellent for bonding various surfaces together, and it can be used for most common household surfaces. However, it also includes;
- Ceramics
- Porcelain
- Wood
- Card
- Paper
- Most Plastics
- Leather
- Cork
- Linoleum
- Rubber
- Stone
- Glass
- Metals
- Dense fabric
Preparation
Ensure you prepare the surface before application; this is to optimise adhesion. Complete this by removing contaminants that can hinder the adhesion, such as dust, oil, grease etc.
Application
Porous Surface:
- Unscrew the cap and spread a thin, even adhesive layer onto one of the surfaces.Â
- Bring the surfaces together and hold them firmly.
Non-Porous Surface:
- Improve adhesion by abrading both surfaces with sandpaper
- Unscrew the cap and spread a thin, even layer of adhesive onto both surfaces
- Allow adhesive to dry to a tough tacky finish (5 - 10 minutes), then press firmly on both surfaces.
With both types of surfaces, the full strength of this adhesive is achieved within 24 hours with the temperature at 20°C
Limitations
- Will not stick polyethene, polypropylene or PTFE
- This product is not suitable for bonding acetate, rayon or items which contain a hot fluid
- Do not use this product near polish or some painted surfaces
- Do not apply this product to an area which is immersed in water
- This product is unsuitable for bitumen, asphalt, or cellulose-painted surfaces.
