Klober Profile-Line Twin Plain Tile Vent - Brown KG9861-0247 (Box of 10) 
ALM Code 5 Milled Lead - 600mm x 3m 
Everbuild 502 Wood Adhesive – 1 Litre 
Bond It Economy Sealant Gun - Blue 900ml 
Sika Dustproofer – Clear 5 Litre 
Bond It Cyanoacrylate Superglue Medium Viscosity, Clear - 20g 
Hambleside Danelaw TV15/7 Tile Vent - Brown (Box of 5) 
Everbuild Multi-Stick Adhesive - White 350ml 
Cromar Cold Gritting Solution - Black 5 Litres 
Code 6 Cast Lead - 510mm x 6m 
Everbuild Everflex 200 Contractors LMA Silicone - Brown 295ml 
ALM Code 6 Milled Lead Flashing - 800mm x 6m 
FloPlast Square Line Stop End Outlet Black – 114mm x 65mm 
Bostik Brushable Waterproofer - Black 5L 
ALM Code 8 Milled Lead - 914mm x 3m 
Soudal Handheld Gap Filler Expanding Foam - Champagne 750ml 
ALM Code 3 Milled Lead - 450mm x 6m 
Code 8 Cast Lead - 1000mm x 3m 
Evo-Stik 528 Instant Contact Adhesive – 5 Litre 
Siroflex Trade High Viscosity Superglue - 20g 
Soudal Genius Gun Building Adhesive 750ml - Champagne 
Everbuild Feb® Rendamix - 5L Amber 
Soudal PVCu Gap Filler, White - 300ml (Box of 12) 
Uses
The Stick2 Superglue GP by Everbuild is ideal for perfectly fitting surfaces that need to be bonded, with its curing time of only 10-15 seconds. It offers small but effective gap-filling properties suitable for up to 0.1mm and is a convenient single-component adhesive. It's an environmentally friendly alternative glue, and this is due to its economical usage alongside its solvent-free composite. Surfaces that this product is excellent for bonding include;
- Plastics
- Metals
- PVCu
- EPDM
Preparation
Surfaces to be bonded must be cleaned, dry and free from contaminants that can hinder the adhesion, such as dirt, dust, oil, grease, etc. To avoid chilling glue lines, store surfaces in a warm environment before bonding, and when commencing the application, ensure there's a relative humidity of 50%+
Application
- Unscrew the cap of the product
- Squeeze the product to one surface only
- Press the surface and hold them together for at least 10 seconds, taking care with the aligning as the open time is short.
Limitations and Notes
- This product should be used in applications that are constantly immersed in water.
- Ensure the surfaces are degreased before bonding
- Ensure surfaces are close fitting as it doesn't bridge gaps
- Do not use on surfaces or products that are bitumen or tar-leaching
