OX Tools Pro Heavy Duty Flexi Tub - 73L 
OX Pro Aluminium Metric Rafters Square - 180mm 
Everbuild Plumbers Gold Sealant – Clear 290ml (Box of 12) 
Soudal Trade Sanitary Silicone - Clear 290ml (Box of 12) 
Code 7 Cast Lead - 600mm x 3m 
Code 5 Cast Lead - 390mm x 3m 
ALM Code 4 Milled Lead - 1200mm x 3m 
Cromar Bitumen Primer – Black 5 Litre 
Everbuild Showerproof Bathroom Silicone – White 280ml 
Everbuild Pinkgrip SF But It’s White – 380ml (Box of 12) 
Code 6 Cast Lead - 760mm x 3m 
FloPlast Half Round Stop End Outlet, Brown – 112mm 
Soudal Silirub 2, White - 300ml 
Samac Aluminium Clout Nails - 50mm x 3.35mm 10kg Box 
Everbuild General Purpose Silicone - Clear 280ml (Box of 12) 
Everbuild Showerproof Bathroom Silicone - Clear 280ml 
Bond It B3 Fill And Fix Expanding Foam Aerosol - Beige 500ml 
Everbuild Multi-Stick - White 350ml (Box of 12) 
Bond It PVA & Adhesive Sealer White 1L - Box of 12 
Uses
The Stick2 Superglue GP by Everbuild is ideal for perfectly fitting surfaces that need to be bonded, with its curing time of only 10-15 seconds. It offers small but effective gap-filling properties suitable for up to 0.1mm and is a convenient single-component adhesive. It's an environmentally friendly alternative glue, and this is due to its economical usage alongside its solvent-free composite. Surfaces that this product is excellent for bonding include;
- Plastics
- Metals
- PVCu
- EPDM
Preparation
Surfaces to be bonded must be cleaned, dry and free from contaminants that can hinder the adhesion, such as dirt, dust, oil, grease, etc. To avoid chilling glue lines, store surfaces in a warm environment before bonding, and when commencing the application, ensure there's a relative humidity of 50%+
Application
- Unscrew the cap of the product
- Squeeze the product to one surface only
- Press the surface and hold them together for at least 10 seconds, taking care with the aligning as the open time is short.
Limitations and Notes
- This product should be used in applications that are constantly immersed in water.
- Ensure the surfaces are degreased before bonding
- Ensure surfaces are close fitting as it doesn't bridge gaps
- Do not use on surfaces or products that are bitumen or tar-leaching
