Ronseal Wet Rot Wood Hardener - 750ml 
Everbuild XT44 Maintenance Spray - 400ml 
Over Fascia Vent, 10mm 
Soudal Trade All Weather Sealant - Clear 290ml 
Everbuild P11 Central Heating System Cleanser – 1 Litre 
Isoflex Special Primer - 750ml 
OX Tools OXIT Sealant & Adhesive - Anthracite 290ml (Box of 12) 
Bond It PVA & Adhesive Sealer - White 2.5kg 
Siroflex Trade Strength Glass Cleaner - 1L 
Code 3 Cast Lead - 180mm x 6m 
Bond It Dustproof & Hardener - Clear 5L 
Bond It Monster Scrim Drywall Tape - White 48mm x 90m 
OX Trade Plastic Speed Rafters Square Set 
Ronseal Anti-Bacterial Worktop Oil - Clear 1L 
Ronseal Quick Drying Smooth Finish Filler - 330g 
Klober Small Slate Vent - Slate Grey 
Ronseal Multi Purpose Smooth Finish Filler - 330g 
ALM Code 4 Milled Lead - 914mm x 3m 
Everbuild Black Jack 902 Bitumen & Flashing Primer – 5 Litre 
Easy-Trim Lead R Flashing Smooth – 300mm x 5m 
Bond It All Weather Roofing Compound - Black 5L 
OB41 Fast Tack Contact Adhesive Spray - 500ml 
Ronseal Stays White 2in1 Paint & Primer - Satin 2.5L 
Klober Uni-line Vent Slate Grey 
Everbuild Coving Adhesive & Joint Filler - White 290ml (Box of 12) 
Uses
The Wet Rot Wood Hardener by Everbuild is the ultimate wet rot combating product, achieved through a unique selected resin composite which soaks deeply into the surface of the wood into the fibres, hardening it and providing a base for subsequent wood filling and restoration. Applications this product is typically applied in include;
- Strengthen and reinforce softwood and hardwood
- Repairing wood damaged by wet rot
Preparation
Before application, remove all decayed and crumbly wood until you're down to a solid base. Ensure that the wood is free from contaminants like dust and is reasonably dry, sound and clean.
Application
- Shake the product and decant solution into a suitable container
- Apply to the area by brush until it's completely saturated
- To achieve an enhanced effect, drill a hole into the wood and apply the wood hardener to it
- Allow drying and remove any excess hardener with a wire brush
- Once hard, you can fill it with a suitable wood filler and sand and then stain or paint the surface.
Limitations and Notes
- Avoid contact with metal, plastic, painted surfaces and glass
- Do not use this product as a surface treatment
- Any residual hardener on the surface must be removed before filling
