Everbuild Stixall Extreme Power – White 290ml 
Timco 30mm Cladding Pin - 250 Pieces 
Bond It PVCu Solvent Fast Acting Cleaner - Clear 1L 
Hedgehog Gutterbrush Clips (Pack of 20) 
Bond It Trowel Mastic - Black 2.5L 
Bond It Bitumen Paint - Black 25L 
Easy-Trim Universal Dry Verge System - Brown (Box of 50) 
Soudal PTFE Spray - 400ml 
OB41 Fast Tack Contact Adhesive Spray - 500ml 
Armatool Mop Heads Size 12 
Everbuild Pinkgrip Adhesive Solvent Based – 350ml 
Soudal Genius Gun Building Adhesive 750ml - Champagne (Box of 12) 
Easy-Trim End Cap Half Round - Black (Box of 10) 
Freeflow 65mm Square Down Pipe Connector - Black 
ALM Code 3 Milled Lead - 150mm x 3m 
OX Pro Heavy Duty Aviation Snips Right Cut (Green) 
Samac Snowguard - 150mm x 2m 
Bond It SBR Admixture - White 2.5L 
OX Tools Winter Set - Beanie, Socks, Thermal Gloves 
Bond It Aluminium Foil Tape - 75mm x 45M 
Soudal Water Stop Roof Repair Compound – Grey 4kg 
Hedgehog Gutter Brush Leaf Guard White – 4m x 100mm 
Ronseal 6 Year Anti Mould Paint - White Silk 2.5L 
Everbuild Firefoam B2 Gun Grade - Pink 750ml 
Uses
The Gorilla Glue is an excellent, powerful adhesive perfect for application to various substrates. It is delivered in a small, easy-to-use tube that extrudes a resin that makes contact and instantly begins to cure into an unbreakable bond. Its formula is forged from a polyurethane formula that expands, creating small but excellent gap-filling properties. Its high-strength bond is 100% resistant to water and heat temperatures, making it perfect for interior and exterior applications.
Preparation
Before commencing the application, it's important to prepare the areas to ensure optimal results are achieved. Remove any contaminants on the surface that can hinder adhesion, including dirt, dust, grease, oil, organic growth, loose debris, flaking material, etc.
Application
- Due to this product curing upon moisture, you should lightly dampen all surfaces to be bonded with water, ensuring that you don't saturate the surface and do not add it to the glue.
- Apply a thin layer of adhesive to either surface, taking care not to apply it over. The glue, while curing, will expand up to 3-4 times its original size.
- Bring the surfaces together using clamps and hold tight for at least 1-2 hours. If you don't have clamps, placing weighted objects over the surface will help keep it compressed.
- After using the glue, you wipe the bottle's nozzle clean using a dry cloth, squeeze all the air out of the bottle, and secure the lid back on.
