OX Spectrum Trade XL Mortar Raking Diamond Blade 115/22.23mm 
ALM Code 6 Milled Lead Flashing - 850mm x 6m 
Timco Copper Disc Rivets 
Siroflex SX Contractors LMN Silicone OAK 300ml 
Everbuild Plumbers PVC Pipe Cement - Clear 250ml (Box of 12) 
Ronseal Garden Furniture Restorer - 1L 
Bond It Sealant Applicator Tool 
Everbuild Stick2 Carpet Fix Spray - 500ml 
ALM Code 7 Milled Lead - 914mm x 6m 
Freeflow 68mm Round Gutter Drain Pipe 112° Branch - Black 
OX Pro Tuff Rule - Cyan 
Everbuild Triple Action Wood Treatment – 5 Litre 
Ronseal's EGC Hardener BPO - 30g 
ALM Code 3 Milled Lead - 800mm x 6m 
Code 5 Cast Lead - 300mm x 3m 
Timco Lifting Sling 2000kg / 2 Tonnes 
Freund Mastercut Natural Slate & Man Made Slate Cutter with Hole Punch 
Ronseal Exterior Yacht Varnish - Satin 2.5L 
Everbuild Silicone Spray - 400ml (Box of 12) 
FloPlast Half Round Internal Stop End, Black – 112mm 
Freeflow 68mm Round Gutter Drain Pipe 112° Branch - White 
Bond It Multi-Wipes For Hands, Tools & Surfaces - White 100 
Everbuild Pinkgrip SF But It’s White – 380ml 
Bond It Rubber Bitumen Emulsion - Black 25L 
Everbuild Pinkgrip Adhesive Solvent Based - 350ml (Box of 12) 
Uses
The Gorilla Wood Glue is the ultimate wood glue on the market. It offers a virtually unbreakable bond accompanied by excellent resistance to harmful factors, allowing you to have confidence in a long-lasting bond.
Its formula is entirely water-resistant and applied similarly to conventional PVA Glue but provides the bonding strength of Gorilla. This glue dries to a natural colour to prevent unsightly marks, and instead, the colour blends naturally with the wood.
Preparation
To achieve optimal results, clean all surfaces to be bonded, ensuring the wood is sound, stable, and free from contaminants. Remove impurities such as dirt, dust, grease, oil, flaking material, loose debris, organic growth, and wet rot. Shake the bottle vigorously and remix if the material inside the glue has thickened or separated.
Application
- Apply the glue generously to the surface.
- Connect and compress the surfaces together using clamps or weighted objects. This clamping process should last about 20-30 minutes, and the parts should fit tightly.
- Any excess glue can be removed before it's dried using a clean, wet cloth; if it's dried, you'll have to scrape any excess glue off.
