Everbuild Jetcem Deep Rapid Repair Sand & Cement – 2kg 
Ronseal Stays White One Coat Non-Drip Paint - Matt 750ml 
Timco Mixed Hose Clips 
IKO Easymelt Bonding Bitumen Keg - 10kg 
Bond It PVA & Adhesive Sealer - White 1L 
ALM Code 7 Milled Lead - 1000mm x 3m 
Everbuild Stixall Extreme Power – Black 290ml 
Everbuild Bath & Kitchen Sealant - 200ml 
Klober Thin Line Vent - Black KG9855-3-0450 (Box of 10) 
Cromar Roof Felt Adhesive - Black 1 Litre 
Timloc InvisiWeep Extension Tube - 500mm Clear 
Easy-Trim Eaves Comb Filler, 1m 
ALM Code 6 Milled Lead Flashing - 600mm x 6m 
Bond It Contractors PVA - 5L White 
Ronseal Stays White Ultra Tough White Satin Paint - 2.5L 
Ronseal Stays White One Coat Non-Drip Paint - Matt 2.5L 
OX Trade 3 Piece Paint Brush Set - 25/38/50mm 
Ronseal Diamond Hard Doorstep Paint - Tile Red Satin 750ml 
ALM Code 5 Milled Lead - 450mm x 6m 
Soudal Soudafoam Hand Held One Shot - 150ml (Box of 12) 
Everbuild General Purpose Silicone - Clear 280ml (Box of 12) 
Uses
The Gorilla Wood Glue is a powerful, versatile adhesive that's perfect for application to wooden substrates. It provides an unbreakable bond with excellent water resistance, rated to D3. It's applied similarly to a conventional PVA adhesive but instead is formulated with Gorilla's strength. The glue cures into a natural colour, enabling aesthetically pleasing finishes as it blends naturally with the wood.
Preparation
To ensure that you achieve optimal results, you must clean and prepare the surfaces, removing contaminants such as dirt, dust, grease, oil, loose debris, flaking material, etc. After cleaning and removing the impurities from the surface, ensure it's dried and ready for bonding. If the Wood Glue has separated inside the bottle, shake thoroughly to remix the material.
Application
- Apply the glue to the surface generously.
- Bring the surfaces together and hold for at least 20-30 minutes using clamps or weighted objects.
- Any excess glue before it's cured can be removed using a clean, damp cloth; if the glue has cured, you'll need to scrape it off.
