Easy-Trim Universal Dry Verge System - Brown (Box of 50) 
Soudal Multi Cleaner - 400ml 
ALM Code 5 Milled Lead - 1000mm x 3m 
Samac Hall Hooks - (Bags of 10) 
Siroflex Trade Superglue Activator Spray - 400ml 
Samac Aluminium Clout Nails - 50mm x 3.35mm 10kg Box 
Thompson's One Coat Waterseal - 5L 
Bond It All Weather Roofing Compound - Black 5L 
Everbuild Clear Fix – 290ml (Box of 12) 
Soudal Trade Gun and Foam Cleaner - 500ml 
Evo-Stik Gripfill Gap Filling Adhesive – 350ml 
Klober Single Pantile Vent - Slate Grey KG9860-0429 (Box of 10) 
Azpects EASYSeal Sandstone Enhancer and Sealer 5L 
ALM Code 3 Milled Lead - 1200mm x 6m 
Soudal Manual Foil Pack Gun Aluminium, 600ml (Sealant Gun for Sausages) 
Everbuild Mammoth Barrier Tape - Red/White (72mm x 500m) 
Everbuild KOS Black Fire Cement - 1kg 
Thompson's Emergency Roof Seal - Black 1L 
Bostik Flashband Self Adhesive Flashing Tape – Grey 3.75m x 75mm 
Cromar Black Bitumen Paint – 1 Litre 
Ronseal Multi Purpose Filler Smooth Finish Powder - 2Kg 
Code 4 Cast Lead - 1600mm x 6m 
OX Trade 4 Piece Spirit Level Set - 230, 600, 1200 & 1800mm 
Soudal Lead Sheet Sealant 290ml - Grey (Box of 12) 
ALM Code 6 Milled Lead Flashing - 800mm x 6m 
Everbuild Stick2 Hard Plastic Adhesive - 30ml 
SEAL PRO, Low Modulus Hybrid Universal Sanitary Sealant & Adhesive Bond, White - EU3 
Everbuild Showerproof Bathroom Silicone - Clear 280ml 
Code 6 Cast Lead - 390mm x 3m 
Siroflex Trade Strength Glue Screws SF Adhesive 
Code 8 Cast Lead - 450mm x 3m 
OX Tools Trade Bucket, Black - 15 Litre 
Everbuild Tecnic Silicone 825 – Limestone White 380ml (Box of 25) 
Ronseal Diamond Hard Floor Varnish - Clear Matt 2.5L 
Uses
The Anti-Bacterial Worktop Oil by Ronseal offers excellent protection whilst enhancing your wood. This unique formula delivers a clear finish to your surface, leaving a silky-smooth finish. It doesn't crack or peel; instead, by nourishing the wood with water-resistance properties. You can ensure your wood itself won't get harmed over time.
Preparation
When preparing the surface, identify if the surface is bare wood or has previously been oiled. If it has had oil formerly applied to it, ensure it's in good condition and cleaned, then you can apply directly onto it.
If it's bare wood, you should use 120 grit sandpaper and lightly sand the surface, using white spirit and a cloth to wipe down the surface, removing the dust that settled.
Application
- Shake or stir the tin thoroughly before using it; you should see silver particles evenly distributed to know it's mixed correctly.
- Using either a brush or cloth, apply a thin, even coat across the surface, following the grains with each stroke.
- Leave it for at least 10 minutes, then use a lint-free cloth to wipe any excess off the surface.
- Wait at least 24 hours before applying a second coat. To achieve optimal results, you should apply 3-4 coats.
- Every six months, when water smudging instead of beading occurs. It will let you know that you'll need to recoat the surface.
Aftercare
Clean anything with a dedicated wooden worktop cleaner to maintain the surface, as household cleaners may degrade the oil. Any scruff, scratches, or general damages that need repairing should have 120 grit sandpaper applied to the area. Then apply oil again in that section.
