Hambleside Danelaw Double Roman Tile Vent, TV15/3 - Slate Grey (Box of 5) 
ALM Code 6 Milled Lead Flashing - 300mm x 6m 
Everbuild Multi-Stick - White 350ml (Box of 12) 
Everbuild Clear Fix – 290ml 
Bond It Mega Foam Gun/Aerosol PU Expanding Foam - Beige 750ml 
Evercryl Emergency Roof Repair - Clear 310ml (Box of 12) 
OX Heavy Duty Soft Gel Filled Knee Pad 
Ronseal Garden Furniture Restorer - 1L 
Stanley Heavy-Duty Scraper - 75mm 
Ronseal uPVC Paint - White Satin 2.5L 
Timco Impact Driver Bit Set 
Klober Single Pantile Vent - Terracotta KG9860-0152 (Box of 10) 
Siroflex Seal & Fix Hybrid Adhesive & Sealant - Black 290ml 
FloPlast Ogee Fascia Bracket, White 
ALM Code 7 Milled Lead - 390mm x 6m 
Bond It Superglue Activator Accelerator Spray Cyanoacrylate Aerosol - 200ml 
ALM Code 8 Milled Lead - 1200mm x 3m 
Bond It Multi-Wipes For Hands, Tools & Surfaces - White 100 
Bond It PVA & Adhesive Sealer - White 1L 
Ronseal Crystal Clear Outdoor Varnish - Matt 2.5L 
Soudal Fix ALL Turbo - White 290ml 
Everbuild Instant Nails – White 290ml (Box of 12) 
Sika Patio Seal – 5 Litre 
The Ronseal Diamond Hard Floor Wax - Natural Oak 2.5L offers the ultimate protection for your floors, delivering outstanding diamond-hard protection with a beautiful natural finish. The low-odour formula created by the Ronseal Scientist prevents any unwanted waxing smell from lingering whilst still effectively covering up to 16m².
Preparation
You should prepare the surface by sanding it down using a floor sander or 120-grit sandpaper. Any previously painted or treated floors must have their coating entirely removed, and when sanding the surface, you should ventilate the area and wear a mask. Once you've done with the sanding, wipe the floor with white spirit and a cloth to remove any leftover dust.
Application
- When opening the tin, stir thoroughly to break up any formed lumps.
- Apply the wax directly to the surface and brush toward the woodgrain; avoid overlapping whilst applying the product.
- You should wait 2 hours before applying the second coat.
- Before applying the final coat, lightly sand the floor to help the adhesion of the wax
- After completing the application, you must wait 8 hours before walking back on the floor and allow 24 hours to pass before moving furniture into the room.
Aftercare
To maintain the floor, you should regularly clean it, removing contaminants that can damage it. If you notice any damage to the floor over time, lightly sand the area and re-apply the wax; then, it'll be as good as new.
