3 x Oxyturbo Oxygen & Gas Refill 
SikaFlex EBT+ Polyurethane Adhesive & Sealant, Black - 300ml (Box of 12) 
ALM Code 8 Milled Lead - 1200mm x 6m 
Everbuild Stick2 Superglue De-Bonder - 20ml 
ALM Code 5 Milled Lead - 510mm x 6m 
ALM Code 7 Milled Lead - 210mm x 3m 
Hambleside Danelaw TV15/4 Tile Vent - Brown (Box of 5) 
Freeflow 112mm Round Gutter System 90° Gutter Angle - White 
Code 4 Cast Lead - 850mm x 6m 
Code 5 Cast Lead - 450mm x 3m 
Evo-Stik Gripfill Gap Filling Adhesive – 350ml 
Easy-Trim End Cap Half Round - Black (Box of 10) 
Code 8 Cast Lead - 850mm x 6m 
OB41 Fast Tack Contact Adhesive Spray - 500ml 
Code 6 Cast Lead - 150mm x 6m 
Everbuild Multi-Use Wonder Wipes Tub (100 Wipes) 
Timloc Felt Support Tray 600mm 
ALM Code 3 Milled Lead - 360mm x 6m 
Sika AnchorFix®-1 Fast Cure Anchoring Adhesive System - Light Grey 300ml 
SikaFlex 221 Adhesive & Sealant - Black 300ml (Box of 12) 
Bond It Trowel Mastic - Black 2.5L 
Uses
The Multi-Purpose Powder Smooth Filler by Ronseal delivers excellent, quick internal repairs for various surfaces. Its high-quality formula offers a robust, long-lasting repair supporting gaps up to 40mm. Some of the surfaces that this product is suitable for include;
- Plaster (Internal only)
- Stone (Internal & External)
- Concrete (Internal & External)
- Wood (Internal & External)
Preparation
Before applying, ensure you prepare the surface to optimise the adhesion. To clean the area, wipe it down, removing any dust, grease, dirt and other contaminants that can interfere with the bonding.
Application
- Using the measuring scoop, measure 2 parts filler and mix it with 1 part water.
- Fill the hole using the formula you've created, ensuring you cover all cracks and crevices.
- Smooth it down with a wet knife once you've filled the area, but make sure it bulges out slightly to allow sanding when dry for a smooth, flush finish.
- If the gap is more significant than 40mm, apply in intervals of 40mm, giving a couple of hours to dry between each layer.
- After filling the entire area, give it a couple of hours to dry and then sand it down.
Aftercare
Remove any excess formula on any tools using a damp cloth
