ALM Code 5 Milled Lead - 914mm x 3m 
Code 6 Cast Lead - 300mm x 6m 
Hambleside Danelaw Double Roman Tile Vent, TV15/3 - Terracotta (Box of 5) 
Everbuild Dual Purpose Foam Cleaner – 500ml (Box of 12) 
Gorilla Glue - Dark Brown 60ml 
ALM Code 3 Milled Lead - 914mm x 3m 
Everbuild Forever White Silicone Sealant – 295ml (Box of 12) 
Code 4 Cast Lead - 450mm x 3m 
OB41 Fast Tack Contact Adhesive Spray - 500ml 
OX Trade Stubby Level - 100mm 
Cromar Bitumen Trowel Mastic - Black 1L 
FrogTape® Delicate Surface Masking Tape - Yellow 36mm x 41.1m 
Bond It Saves Nails Instant Grab Adhesive - EU3 Beige 
Timco Collated Drywall Self Drilling Screws 
Bond It Squeezy Door and Frame Sealant - EU2 White 
Code 5 Cast Lead - 390mm x 3m 
10 x Permavent Black Breather Membrane – 1m x 50m 
FloPlast Square Line Pipe Branch White – 65mm 
Bond It Pro-Mate LMA Silicone - Translucent EU3 
Thompson's One Coat Patio & Block Paving Seal - 5L 
Everbuild Forever Clear Silicone Sealant – 295ml 
Bond It 5 Minute PU Wood Gel Translucent 300ml - Box of 12 
Everbuild Everflex Lead Mate Sealant Grey - 295ml (Box of 25) 
ALM Code 7 Milled Lead - 240mm x 3m 
Ronseal Stays White Ultra Tough White Satin Paint - 750ml 
Uses
The Multi-Purpose Powder Smooth Filler by Ronseal delivers excellent, quick internal repairs for various surfaces. Its high-quality formula offers a robust, long-lasting repair supporting gaps up to 40mm. Some of the surfaces that this product is suitable for include;
- Plaster (Internal only)
- Stone (Internal & External)
- Concrete (Internal & External)
- Wood (Internal & External)
Preparation
Before applying, ensure you prepare the surface to optimise the adhesion. To clean the area, wipe it down, removing any dust, grease, dirt and other contaminants that can interfere with the bonding.
Application
- Using the measuring scoop, measure 2 parts filler and mix it with 1 part water.
- Fill the hole using the formula you've created, ensuring you cover all cracks and crevices.
- Smooth it down with a wet knife once you've filled the area, but make sure it bulges out slightly to allow sanding when dry for a smooth, flush finish.
- If the gap is more significant than 40mm, apply in intervals of 40mm, giving a couple of hours to dry between each layer.
- After filling the entire area, give it a couple of hours to dry and then sand it down.
Aftercare
Remove any excess formula on any tools using a damp cloth
