Klober Permo Ultra 120 - 1m x 50m 
ALM Code 5 Milled Lead - 450mm x 6m 
Easy-Trim Ridge F Universal 6m Dry Ridge Kit - Pallet of 84 + FREE DeWalt XR Combi Drill + Impact Twin Pack 
ALM Code 6 Milled Lead Flashing - 210mm x 6m 
ALM Code 4 Milled Lead - 914mm x 6m 
Bond It Cyanoacrylate Superglue Hi Viscosity - Clear 20g 
FloPlast Downpipe Rainwater Diverter Kit RVS1 
Gorilla Contact Adhesive Tube - Clear 75g 
Everbuild Mammoth Packaging Tape - 48mm x 50m 
Code 7 Cast Lead - 1200mm x 3m 
Soudal Trade All Weather Sealant - Clear 290ml 
FloPlast Half Round Running Outlet, Black 
Ronseal Anti-Condensation Paint - White 2.5L 
Bond It Monster Water Resistant Tape - 48mm x 11m (Black) 
Code 6 Cast Lead - 180mm x 3m 
Code 4 Cast Lead - 914mm x 3m 
Soudal Fix ALL Flexi – White 290ml (Box of 12) 
Code 8 Cast Lead - 800mm x 3m 
Soudal B1 Fire Class Expanding Foam Handheld - 750ml 
OX Pro Magnetic Level 600mm 
ALM Code 7 Milled Lead - 1200mm x 3m 
Soudal 140 LQ Contact Adhesive – 5 Litre 
OX Pro Heavy Duty Aviation Snips Straight Cut (Yellow) 
Everbuild Multi-Stick Adhesive - White 350ml 
Uses
The Multi-Purpose Powder Smooth Filler by Ronseal delivers excellent, quick internal repairs for various surfaces. Its high-quality formula offers a robust, long-lasting repair supporting gaps up to 40mm. Some of the surfaces that this product is suitable for include;
- Plaster (Internal only)
- Stone (Internal & External)
- Concrete (Internal & External)
- Wood (Internal & External)
Preparation
Before applying, ensure you prepare the surface to optimise the adhesion. To clean the area, wipe it down, removing any dust, grease, dirt and other contaminants that can interfere with the bonding.
Application
- Using the measuring scoop, measure 2 parts filler and mix it with 1 part water.
- Fill the hole using the formula you've created, ensuring you cover all cracks and crevices.
- Smooth it down with a wet knife once you've filled the area, but make sure it bulges out slightly to allow sanding when dry for a smooth, flush finish.
- If the gap is more significant than 40mm, apply in intervals of 40mm, giving a couple of hours to dry between each layer.
- After filling the entire area, give it a couple of hours to dry and then sand it down.
Aftercare
Remove any excess formula on any tools using a damp cloth
