Ronseal One Coat Wood Primer & Undercoat - White 750ml 
Everbuild 501 PVA - 5 Litre 
Ronseal Stays White Ultra Tough White Satin Paint - 750ml 
Bond It Multi-Purpose Powder Filler - White 1.5Kg 
Bond It Mould Stop - Clear 1L 
Everbuild Triple Action Wood Treatment – 5 Litre 
Bond It Rubber Bitumen Emulsion - Black 2.5L 
Soudal Butyrub Non-Setting Mastic - Grey 300ml 
Code 5 Cast Lead - 1200mm x 6m 
ALM Code 5 Milled Lead - 800mm x 3m 
Soudal Fix ALL High Tack Hybrid Sealant - Invisible 290ml 
Everbuild Jumbo Mitre Fast Kit (Box of 6) 
OB41 Cut Tap Drill Fluid - 400ml 
ALM Code 8 Milled Lead - 510mm x 6m 
Everbuild Silicone Spray - 400ml (Box of 12) 
Timco Chalk Line Set 
Samac Half Round Snowguard Bracket - 225mm (9") 
FloPlast Half Round Downpipe Branch 67.5°, White 
Everbuild Everflex Contract AC50 Acoustic Sealant & Adhesive - White 380ml 
IKO Shed Felt - Black 8m Roll 
ALM Code 4 Milled Lead - 600mm x 6m 
OB41 Fast Tack Contact Adhesive Spray - 500ml 
Uses
The Quick Drying Smooth Finish Filler by Ronseal is the go-to filler for a smooth, quick finish. It's perfect for the home D.I.Yer looking to make a quick repair in a short amount of time. With no experience required, you can pick this product, apply it and sit back, wait 30 minutes, and it's complete, no call out and no tradesperson needed. The surfaces that you can apply this product onto include the following;
- Interior wood
- Interior Stone
- Interior Concrete
- Plaster
Preparation
Prepare the surface by ensuring it's clean, removing dirt, dust and other contaminants that can hinder this product's adhesion.
Application
- Get the filler and push it directly into the hole, filling the hole entirely and leaving it raised slightly to ensure you've filled it correctly.
- Using a wet knife, whilst the filler is still wet, smooth it down, leaving a flush, professional finish.
- Please note you can fill gaps larger than 10mm. You need to apply the first load of 10mm into the hole, wait for it to dry, and repeat until the whole is filled.
Aftercare
Once the filler is dried, you can paint or decorate it as you like. Any tools that have the filler on them can be cleaned with warm, soapy water.
