ALM Code 6 Milled Lead Flashing - 150mm x 6m 
Everbuild Weather Mate Gap Filler & Adhesive - Black 295ml (Box of 25) 
Freeflow 68mm Round Gutter Drain Pipe 112° Branch - Black 
Klober Profile-Line Twin Plain Tile Vent - Brown KG9861-0247 (Box of 10) 
Code 3 Cast Lead - 760mm x 3m 
Code 5 Cast Lead - 390mm x 3m 
Soudal Fix ALL Flexi – Black 290ml (Box of 12) 
Bond It Monster Water Resistant Tape - 48mm x 11m (Black) 
Cromar Roof Felt Adhesive - Black 1 Litre 
ALM Code 4 Milled Lead - 1200mm x 6m 
Soudal Lead Sheet Sealant 290ml - Grey (Box of 12) 
Everbuild Multi-Use Giant Wonder Wipes Tub (300 Wipes) 
Everbuild Firefoam B1 Gun Grade Expanding Foam - Pink 750ml 
Bond It Dustproof & Hardener - Clear 5L 
Everbuild Bath & Kitchen Sealant - 200ml 
ALM Code 3 Milled Lead - 360mm x 6m 
Bond It High Gloss Block Sealer - Clear 5L 
Code 7 Cast Lead - 180mm x 3m 
Code 6 Cast Lead - 450mm x 6m 
Timco Lithium EP2 Grease - 400g 
Soudal Repair Express Cement – Grey 290ml (Box of 12) 
Everbuild Seal Rite Strip / Smooth Out Twin Pack 
OX Pro Aluminium Hawk - 13 inch x 13 inch 
Uses
The Stays White 2in1 Primer and Paint by Ronseals delivers excellent colour and protection, all of this achieved in just two coats. Its unique formula provides a non-drip application, aiding you in preventing unwanted spillages. Another feature that allows this product to stand out from the rest is its resistance to scruffs and scratches.
Preparation
You should prepare the surface correctly to optimise the paint's colour and finish. Sand the surface with 120 grit sandpaper, and wearing a facemask during this is advised to prevent inhaling and dust particles. After you've sanded the surface, you should use white sprit and a cloth to wipe and clean the wood. If any knots are present, you can use a knot blocker if you don't want it to show through the paint.
Application
- Ensure you stir the paint pigments thoroughly in the tin.
- Dip a synthetic brush into the paint and apply it, brushing in the direction of the grain, leaving 4 hours for the first coat to dry.
- After it's dried, apply a second coat in the same fashion as before
- You can touch the second coat in just 30 minutes after application, but it will fully dry in 4 hours.
Aftercare
You'll be able to maintain the wood normally, cleaning as you typically would clean wood. Any damages that may occur can be rectified by sanding the affected area down and applying the over the area.
