Everbuild Stixall Extreme Power – Grey 290ml 
Code 8 Cast Lead - 360mm x 3m 
SikaFlex 221 Adhesive & Sealant - Black 300ml (Box of 12) 
ALM Code 3 Milled Lead - 1600mm x 6m 
Everbuild External Frame Sealant - Grey 290ml (Box of 12) 
Everbuild 402 Waterseal – 25 Litre 
Code 6 Cast Lead - 210mm x 6m 
OX Trade 4 Piece Spirit Level Set - 230, 600, 1200 & 1800mm 
Code 5 Cast Lead - 510mm x 3m 
Code 4 Cast Lead - 600mm x 6m 
Ronseal One Coat Stays White Radiator Paint - Gloss 250ml 
Thompson's One Coat Patio & Block Paving Seal - 5L 
Klober Single Pantile Vent - Slate Grey KG9860-0429 (Box of 10) 
Everbuild Stainblock - White 400ml 
Everbuild Multi-Use Monster Wonder Wipes Tub (500 Wipes) 
ALM Code 5 Milled Lead - 760mm x 3m 
Everbuild Jetcem Rapid Repair Cement – 6kg 
FloPlast Square Line Pipe Branch White – 65mm 
Thompson's Patio & Block Paving Seal - Natural 5L 
Ronseal Diamond Hard Floor Wax - Natural Oak 2.5L 
Uses
The Stays White 2in1 Primer and Paint by Ronseals delivers excellent colour and protection, all of this achieved in just two coats. Its unique formula provides a non-drip application, aiding you in preventing unwanted spillages. Another feature that allows this product to stand out from the rest is its resistance to scruffs and scratches.
Preparation
You should prepare the surface correctly to optimise the paint's colour and finish. Sand the surface with 120 grit sandpaper, and wearing a facemask during this is advised to prevent inhaling and dust particles. After you've sanded the surface, you should use white sprit and a cloth to wipe and clean the wood. If any knots are present, you can use a knot blocker if you don't want it to show through the paint.
Application
- Ensure you stir the paint pigments thoroughly in the tin.
- Dip a synthetic brush into the paint and apply it, brushing in the direction of the grain, leaving 4 hours for the first coat to dry.
- After it's dried, apply a second coat in the same fashion as before
- You can touch the second coat in just 30 minutes after application, but it will fully dry in 4 hours.
Aftercare
You'll be able to maintain the wood normally, cleaning as you typically would clean wood. Any damages that may occur can be rectified by sanding the affected area down and applying the over the area.
