Everbuild Seal Rite Strip Out Tool 
FloPlast Square Line Stop End Outlet Black – 114mm x 65mm 
ALM Code 5 Milled Lead - 1600mm x 6m 
Lead Sheet Restorer - G3 
ALM Code 3 Milled Lead - 1000mm x 6m 
Everbuild Exact Gap Foam - 750ml (Box of 12) 
Soudal Soudafoam Gap Filler Hand Held 750ml (Box of 12) 
Everbuild Smart Tack Handy – 500ml 
Bond It Dec-Mate Flexible Filler - Magnolia EU3 
Ronseal Multi Purpose Wood Filler - Natural 930g 
OX Pro Tough Nylon Braided Builders Line 105m / 350ft - Cyan 
ALM Code 6 Milled Lead Flashing - 510mm x 6m 
Code 4 Cast Lead - 914mm x 6m 
Everbuild Roof & Gutter Sealant – Black 295ml 
Code 8 Cast Lead - 450mm x 6m 
OX Pro Chalk Refill, Red - 226g 
Soudal Grip ALL Solvent-Free - White 290ml 
Everbuild Lumberjack 550 Floor Adhesive – Buff 300ml (Box of 12) 
Armatool Batten Gauge - Up to 14" 
Bond It The Beast PU Adhesive - Brown 150ml 
ALM Code 4 Milled Lead - 1000mm x 6m 
Uses
The Water Seal by Sika is the ultimate surface water sealer with a solvent-based formula designed to protect against water, dampness, and frost. It penetrates up to 5mm deep into the surface, lining the pores with a water-repellent coating without affecting the breathing property of the wall or significantly changing its appearance. The Water Seal can achieve up to 10 years of protection, depending on the surface it's applied onto, its absorbency, application rate and position.
Preparation
The surface should be prepared before application. Complete this by removing all contaminants on the surface, such as dirt, dust, oil, grease, etc. Any defective joints in brick and stone work should be repointed; hairline cracks don't need to be treated, but it's suggested.
Application
- Stir well before using
- Apply by brush or using a low-pressure spray in one coat
- The Water Seal should saturate the surface to obtain a rundown of approximately 300mm.
Cleaning
Clean any equipment and brushes used immediately with white spirit.
