ALM Code 7 Milled Lead - 300mm x 3m 
Everbuild Black Jack 903 Bitumen Trowel Mastic – 2.5 Litre 
FloPlast Half Round Internal Stop End, White – 112mm 
Soudal Soudafoam Gap Filler Hand Held 750ml (Box of 12) 
Oxyturbo Oxygen Refill 
FrogTape® Delicate Surface Masking Tape - Yellow 24mm x 41.1m 
ALM Code 4 Milled Lead - 1200mm x 6m 
Cromar Black Bitumen Paint – 2.5 Litre 
ALM Code 6 Milled Lead Flashing - 450mm x 3m 
Soudal Repair Express Plaster - White 290ml 
Everbuild 408 Super Seal - 5 Litre 
Timloc Universal Slate Roof Vent Pipe Adaptor Kit 
Easy-Trim Lead R Flashing Textured – 150mm x 5m 
Everbuild Power Pro Sealant Gun - 290 to 380ml (Box of 12) 
Klober Regent Tile Vent KG6084, Grey 
Leadax Lead Free Flashing Alternative 600mm (6M Rolls) 
Timco Pipe Shears 
Isoflex Special Primer - 750ml 
Left Hand Klober Uni-Click Dry Verge Units Terracotta 
Klober Single Pantile Vent - Terracotta KG9860-0152 (Box of 10) 
Code 6 Cast Lead - 850mm x 3m 
Thompson's Emergency Roof Seal - Black 1L 
Everbuild KOS Black Fire Cement - 500g 
Everbuild Black Jack 903 Bitumen Trowel Mastic – 5 Litre 
ALM Code 3 Milled Lead - 150mm x 6m 
Hambleside Danelaw TV15/7 Tile Vent - Terracotta (Box of 5) 
Easy-Trim Universal Dry Verge System - Brown (Box of 50) 
OX Tools Diamond Blade Triple Pack 115/22.23mm 
Ronseal One Coat Stain Block - White 750ml 
Uses
The Waterproof PVA by SikaBond is the ultimate, high-quality admixture that delivers exceptional bonding and sealing properties, enhancing water resistance and increasing adhesion. Compared to other waterproof PVA admixtures, the Waterproof PVA by SikaBond sits above the rest on the market because it is easy to use and, unlike normal PVA, will not re-emulsify when wet. Applications this product is typically applied in include;
- Excellent for renders or toughening floors and screeds
- Waterproofs PVA adhesive and admixture, which seals, primes, toughens and waterproofs
- Suitable for brickwork, mortar, render, screed and plaster.
Preparation
Ensure the application surface is sound, stable and free from contaminants that can interfere with this product, including dirt, dust, grease, oil, standing water, cracked or loose materials, etc.
Application
- Shake the bottle well before using
- Apply directly to the surface using a brush or roller
Alternatively;
- Pour it directly into a cement admixture
- The quantity for dilution depends on the surface porosity.
- Allow primer to dry before laying bonding coats (for non-absorbent surfaces, the sealer coat may be omitted)
- Apply the cement screed, render or plaster while the bonding coat is still tacky.
Limitations and Notes
- Do not apply this product below 10°C
- Do not use it on surface if rain is imminent, as it'll wash it off
