Everbuild Standard Nozzle - 6 Pack (290mm & 310mm) 
Everbuild Forever Grey Silicone Sealant – 295ml 
Timco Flat Wood Bit 1/4" Extension Rod - 300mm 
Evo-Stik Impact Adhesive - 500ml 
Everbuild 506 Universal Contractors PVA - 5Kg White 
Easy-Trim Universal Dry Verge System Black (Pallet of 400) 
Bond It Rain-Mate All Weather Sealant - Black EU3 
Siroflex Trade Hand Held PU Expanding Foam 
ALM Code 5 Milled Lead - 180mm x 3m 
Everbuild Everflex Pyro Mate Fire Rated Silicone – White 295ml (Box of 12) 
Code 5 Cast Lead - 850mm x 3m 
FloPlast Universal Hopper, White – 65-68mm 
Code 7 Cast Lead - 150mm x 6m 
Ronseal Garden Furniture Restorer - 1L 
Everbuild Stixall Extreme Power - Black 290ml (Box of 12) 
Leadax Lead Free Flashing Alternative 150mm (6m rolls) 
OX Tools OX Pro Aluminium Kevlar Chalk Line Reel and Refill 
Everbuild 405 Path & Patio Seal – 5 Litre 
Cromar Roof Felt Adhesive - Black 2.5 Litre 
Timloc Over Fascia Vent - 1m 
Bond It Bath Mate Bath & Kitchen Sealant - White EU3 Box of 25 
Everbuild Stainblock - White 400ml 
Uses
The 112 Mortar & Brick Cleaner by Sikagard offers excellent assistance in removing and restoring mortar, bricks and similar substrates. It is formulated with water and hydrochloric acid, offering a solvent-free alternative to traditional brick-and-mortar cleaners.
Preparation
Prepare the area by pre-wetting it with clean water before application. If you want to immerse products into the solution to clean them, use an acid-proof container diluting the solution 1 part 112 Mortar & Brick cleaner to 1 part fresh water.
Application
Immersion:
As mentioned above in the preparation, properly dilute 1 part 112 Mortar & Brick cleaner to 1 part freshwater, submersing the object into a bucket of the solution until the concrete is removed, then rinse with clean water.
Brush:
Do not work on more than 1m² at a time when applying via brush. Leave the solution on the concrete until it's removed the contaminants and wash it down with fresh water to neutralise it.
Limitations
- Due to the aggressiveness of this product, it can attack the colour in paving and blocks, so ensure you carry out a preliminary test prior to completing the entire project.
- Take care in using internally with artificial stone.
- Always wash the surface down after treating it.
- Prevent contact with plants and animals when using this product.
- Surfaces that are sensitive should have a more diluted solution. Use the mixture 1:2 (cleaner to water)
