Cavity Wall Weep Extension 
ALM Code 3 Milled Lead - 150mm x 6m 
ALM Code 6 Milled Lead Flashing - 850mm x 3m 
Soudal Soudafoam Gap Filler Hand Held 750ml (Box of 12) 
Code 8 Cast Lead - 1600mm x 3m 
Everbuild Jumbo Mitre Fast Kit Superglue & Activator 
OX Tools Plasterers Bucket, Blue – 25 Litre 
Permavent Easy Slate 500 - Box of 100 
OX Trade Medium Red Carpenters Pencils - Pack of 10 
Code 7 Cast Lead - 1000mm x 3m 
Everbuild Lumberjack 5 Minute PU Wood Adhesive Gel – 310ml 
84 x ERidge Dry Fix Ridge System Black – 6m Kit 
Klober Univeral Angle Ridge End - Grey 
Code 4 Cast Lead - 800mm x 3m 
Ronseal Multi Purpose Powder Smooth Finish Filler - 500g + 50% 
Code 5 Cast Lead – 650mm x 6m 
Everbuild Tecnic Foil Pack Gun 
ALM Code 8 Milled Lead - 150mm x 6m 
Klober Profile-Line Limarech Tile Vent - Antique Red KG9859-3-0116 (Box of 10) 
OX Tuff Carbon Marking Pencil Value Pack 
OX Pro Magnetic Level 600mm 
Ronseal Interior Varnish - Clear Satin 2.5L 
Everbuild Everflex Contract 700T LMN Silicone - Translucent (Box of 25) 
Uses
30 Min D4 Liquid Pu Wood Adhesive Trade by Soudal is a perfect, well-rounded adhesive that enables various applications most other products struggle with. One of these includes the filling characteristic; the foam formation created by this product allows for uneven surfaces to be bonded effectively. This product has fantastic resilience to water, offering applications externally as well as high humidity. This product can bond windows and door frames, including the corner connection.
Preparation
Before commencing the application, prepare the surface by removing any contaminants that can hinder the adhesion. These include dirt, dust, oil, grease and similar impurities. This product doesn't need a primer; however, spraying the surface with a bit of water is suggested. This is due to the adhesive curing when exposed to moisture in the air and will optimise the application.
Application
- Apply the adhesive using a fine-tooth comb or brush, and apply it to one of the materials to be bonded
- Bring the two surfaces together within a maximum of 15 minutes and clamp them down for at least 3 hours
- If you don't clamp it down, you'll risk from poor adhesive results
