Everbuild Anchorset Green 300 - Grey 300ml (Box of 12) 
OX Pro Mortar Spike, 300mm 
Isoflex Special Primer - 750ml 
SikaFlex EBT+ Polyurethane Adhesive & Sealant, Brown - 300ml (Box of 12) 
Everbuild Gun A Nail Standard – White 310ml (Box of 25) 
Everbuild Black Jack 906 Bitumen Roofing Emulsion – 5 Litre 
ALM Code 3 Milled Lead - 240mm x 3m 
Everflex Galva Mate Duct Sealant - C3 
Ronseal 3 in 1 Mould Killer - 500ml 
Bostik Cementone PVA - 5 Litre 
Ronseal One Coat Damp Seal - White 250ml 
Soudal Trade PU Construction Adhesive - Beige 290ml 
OX Pro Nylon High Vis Builders Line 105m / 350ft - Cyan 
Everbuild Everflex Contract 125 One Hour Caulk – White 380ml 
FloPlast Half Round Line Pipe Socket, White 
OX Pro Impact Bit Set - 31 Piece 
Everbuild Silicone Eater Silicone Sealant Remover - 100ml 
Bond It Economy Sealant Gun - Blue 900ml 
Bond It Rubber Bitumen Emulsion - Black 2.5L 
OX Pro 6 Piece Bricklayers Set 
Klober Single Pantile Vent - Slate Grey KG9860-0429 (Box of 10) 
Everbuild Stick2 Hard Plastic Adhesive - 30ml 
Thompson's Patio & Block Paving Seal - Wet Look 5L 
Bond It Mould Stop - Clear 2.5L 
Everbuild P13 Plumbers Putty - Beige 750g 
Everbuild EB25 Ultimate Sealant & Adhesive – Grey 300ml (Box of 12) 
Uses
Trade Bathroom and Kitchen Silicone by Soudal delivers excellent properties in various applications across a home. This product is resistant to mould and high humidity, making it perfect for bathrooms and kitchens. Other application areas where this product is excellent include air conditioning and ventilation systems. Some of the surfaces that this product can adhere to are;
- Glass
- Aluminium
- Wood
- Staal ST1403
- Plastics (Excluding PE, PP, PTFE)
- Concrete
- Brick
- Ceramic
Preparation
Prepare the surface before starting the application to ensure optimal adhesion. Removing contaminants such as dirt, dust, oil, and grease provides it's clean and dry. Any porous surface should be primed to allow the adhesion to achieve full results.
Application
- Cut the cartridge's top, ensuring you don't damage the threaded screw.
- Screw the nozzle onto the cartridge, cutting it at a 45° angle with an opening slightly larger than the gap to be filled.
- Apply using a standard sealant gun directly to the application area, using a firm continuous pressure on the gun to extrude it efficiently.
- Tool down afterwards with a soapy solution. Ensuring that the soap doesn't touch either surface as this can interfere with the adhesion.
Limitations
- This product is not suitable for natural stone, like marble or granite.
- Direct contact with the secondary sealing of insulating glass units and PVB-film of safety glass must be avoided.
- The first joint sealant must be fully cured before applying the second when using different reactive joint sealants.
