Everbuild Stick2 Superglue De-Bonder - 20ml 
Bond It Cyanoacrylate Superglue Hi Viscosity - Clear 50g 
Ronseal Diamond Hard Floor Wax - Natural Oak 2.5L 
Bond It Contractors PVA - 25L White 
Everbuild Febond PVA - 5L 
Code 8 Cast Lead - 210mm x 3m 
Soudal 30 Min D4 Gel PU Wood Adhesive Trade - 290ml 
Everbuild Tecnic Foil Pack Gun 
Code 7 Cast Lead - 760mm x 3m 
Sika AnchorFix®-1 Fast Cure Anchoring Adhesive System - Light Grey 300ml 
Timloc Universal Slate Roof Vent Pipe Adaptor Kit 
Everbuild Bath & Kitchen Sealant – White 290ml 
Code 4 Cast Lead - 914mm x 6m 
ALM Code 8 Milled Lead - 914mm x 6m 
Soudal Genius Gun Building Adhesive 750ml - Champagne (Box of 12) 
Klober Profile-Line Flat Tile Vent - Antique Red KG9856-3-0116 (Box of 10) 
Everbuild EB25 Ultimate Sealant & Adhesive – Grey 300ml (Box of 12) 
FloPlast Half Round Downpipe 112° Bend, Black 
BORA - PM-4550 Adjustable Speedhorse XT 
Code 5 Cast Lead - 600mm x 3m 
Thompson's One Coat Patio & Block Paving Seal - 5L 
Everbuild Constructa-Pro Adhesive Foam - Grey 750ml 
Everbuild Exact Gap Foam - 750ml 
Bond It Barrier Tape Red and White - 70mm x 500M 
Uses
The Genius Gun Soudafoam Window and Door by Soudal is an excellent polyurethane expanding foam that provides fantastic gap-filling and insulation benefits. Its fantastic insulation and thermal and acoustic properties are unmatched, putting this product at the forefront when installing windows and indoors. Areas in which this product is typically used include general foam applications, both static and non-static joints. Also, installation of windows and doors, filling cavities, sealing openings in roof construction and creating a sound and thermal barrier.
Preparation
Ensure that all surfaces that this product will contact are free from dirt, dust, grease, oil and similar contaminants that can interfere with the adhesion. All surfaces that this product will contact also need to be moistened with water to enhance curing and adhesion.
Application
- Shake the can thoroughly for about 20 seconds
- Open the cover and pull the folded tube to sit perpendicular to the aerosol
- Apply the polyurethane foam to the area, filling 1/3 of it and allowing the expanding foam to fill the rest
- If you have to work in layers, allow the first to cure, slightly moisten the surface and apply your second layer.
Limitations and Notes
- All surfaces that this product will contact must be slightly moistened
- Ensure you clean all uncured PU foam from the gun after each use. If you don't, you'll not be able to reuse the product
- This product can be reused for up to 6 months from first use.
