Everbuild General Purpose Silicone - White 280ml (Box of 12) 
Ronseal Exterior Yacht Varnish - Gloss 1L 
Code 4 Cast Lead - 390mm x 6m 
Everbuild 209 Liquid Mortar Tone - Black 5 Litre 
Soudal Lead Sheet Sealant 290ml - Grey 
Code 6 Cast Lead - 150mm x 6m 
ALM Code 5 Milled Lead - 180mm x 3m 
Everbuild One Strike Filler - White 2.5L 
Soudal Butyrub Non-Setting Mastic - Grey 300ml 
Everbuild Silicone Eater Silicone Sealant Remover - 100ml 
Everbuild Everflex Pyro Mate Fire Rated Silicone – White 295ml (Box of 12) 
Bond It PVA & Adhesive Sealer - White 500ml 
Timco Firmahold Hammer Tacker 
ALM Code 3 Milled Lead - 760mm x 3m 
Cromar Cold Gritting Solution - Black 25 Litres 
Ronseal Ultra Tough Mattcoat Clear Varnish - 2.5L 
ALM Code 4 Milled Lead - 600mm x 3m 
Timco Velocity Premium Multi-Use Screws - Mixed Tray 
Bond It Monster Wipes - White 75 Wipes 
Ronseal One Coat Damp Seal - White 250ml 
Timloc Double Pantile Tile Vent Brown (Box of 6) 
Code 3 Cast Lead - 180mm x 6m 
Soudal Trade All Weather Sealant - Clear 290ml (Box of 12) 
Uses
The Genius Gun Soudafoam Window and Door by Soudal is an excellent polyurethane expanding foam that provides fantastic gap-filling and insulation benefits. Its fantastic insulation and thermal and acoustic properties are unmatched, putting this product at the forefront when installing windows and indoors. Areas in which this product is typically used include general foam applications, both static and non-static joints. Also, installation of windows and doors, filling cavities, sealing openings in roof construction and creating a sound and thermal barrier.
Preparation
Ensure that all surfaces that this product will contact are free from dirt, dust, grease, oil and similar contaminants that can interfere with the adhesion. All surfaces that this product will contact also need to be moistened with water to enhance curing and adhesion.
Application
- Shake the can thoroughly for about 20 seconds
- Open the cover and pull the folded tube to sit perpendicular to the aerosol
- Apply the polyurethane foam to the area, filling 1/3 of it and allowing the expanding foam to fill the rest
- If you have to work in layers, allow the first to cure, slightly moisten the surface and apply your second layer.
Limitations and Notes
- All surfaces that this product will contact must be slightly moistened
- Ensure you clean all uncured PU foam from the gun after each use. If you don't, you'll not be able to reuse the product
- This product can be reused for up to 6 months from first use.
