ALM Code 7 Milled Lead - 300mm x 3m 
OX Tuff Carbon Marking Pencil Value Pack 
Ronseal Kitchen & Bathroom Touch-Up Enamel - 10ml 
Timco Copper Disc Rivets 
ERidge Dry Fix Ridge System Black – 6m Kit 
Code 5 Cast Lead - 850mm x 6m 
Timco Assorted Horseshoe Shims - 1.0 to 6.0mm (Box of 400) 
Everbuild Showerproof Bathroom Silicone - Clear 280ml (Box of 12) 
10 x Permavent Black Breather Membrane – 1m x 50m 
Ronseal Multi Purpose Smooth Finish Filler - 2.2Kg 
Soudal Soudatherm Roof 250 - 800ml (Box of 12) 
Ronseal One Coat Stain Block - White 750ml 
Soudal Roof & Gutter Sealant – Black 290ml (Box of 12) 
Soudal Insulating Foam Genius Gun 750ml - Champagne 
Everbuild Lumberjack 30 Minute PU Wood Adhesive Liquid – 750ml (Box of 12) 
ALM Code 6 Milled Lead Flashing - 300mm x 3m 
Code 3 Cast Lead - 510mm x 3m 
Bond It Rubber Bitumen Emulsion - Black 25L 
Everbuild Stainblock - White 400ml 
OX Pro Mortar Spike, 300mm 
Everbuild Professional Sealant Gun – C4 (290 - 380ml) 
OX Pro Harling Trowel - 165mm X 165mm 
Everbuild Tecnic Silicone 825 – Limestone White 380ml (Box of 25) 
SikaGard Wood Preserver - Clear 5 Litre 
Armatool Lead Dresser Set - 5 Piece Set 
Circular Soffit Vent, Brown 
ALM Code 4 Milled Lead - 1000mm x 6m 
Everbuild Forever Clear Silicone Sealant – 295ml 
Uses
The Soudaduct by Soudal is an acrylic polymer-based, plasto-elastic, solvent-free HVAC ducting sealant suitable for sealing every type of metal duct. It offers excellent adhesion on both galvanised and stainless steel, yet remains flexible and can even be painted once it is fully cured, allowing it to fit in with it's surroundings. It's suitable for joints with a movement max of 12.5% and achieves all requirements in DW144 standards and regulations.
Preparation
Before commencing the application, ensure that the surfaces involved in the application are free from dirt, dust, grease, oil, etc; after you've cleaned them, make sure the surface is bone dry.
Application
- Cut the top of the cartridge, taking care not to damage the threaded screw.
- Cut the nozzle at a 45° angle with an opening slightly larger than the gap to be filled.
- Place it into a suitable sealant applicator tool and apply the material to the surface.
- Smooth it down using a smoothing tool, putty knife, etc, to a smooth finish.
- Ensure that all gaps, cracks and areas of the duct system are sealed to ensure an airtight system.
Limitation and Notes
- Do not apply this product in areas subject to constant water immersion.
- This product is suitable for painting, but preliminary tests must be completed to ensure compatibility before finishing the full job.
- Allow the sealant to cure for 12-24 hours before using the air system.
- This product is not suitable for external use.
