Armatool Flooring Kneepads 
Everbuild 5 Minute Polyurethane Wood Adhesive Gel - 310ml (Box of 12) 
Freeflow 65mm Square Gutter Drain Pipe 112° Branch - White 
OX TOOLTREK Modular Storage System - 3 Piece 
Bostik Flashband Self Adhesive Flashing Tape – Grey 3.75m x 75mm 
Timloc Plain Tile Vent Red (Box of 14) 
FloPlast Half Round Gutter 90° Bend, Brown – 112mm 
Soudal Lead Sheet Sealant 290ml - Grey (Box of 12) 
Everbuild Bath & Kitchen Sealant - 200ml 
ALM Code 8 Milled Lead - 300mm x 6m 
Samac Half Round Snowguard Bracket - 225mm (9") 
Bond It Rain-Mate All Weather Sealant - Clear EU3 
Everbuild Everflex 200 Contractors LMA Silicone - Transparent 295ml (Box of 25) 
OX Pro Mortar Spike, 300mm 
Soudal Vaseline Lubricating & Protective Spray – 400ml 
FloPlast Downpipe Rainwater Diverter Kit RVS1 
ALM Code 5 Milled Lead - 150mm x 3m 
Code 8 Cast Lead - 760mm x 6m 
Everbuild Resiblock Trade – Clear 5 Litre 
Everbuild PVCu Acti-Spray – Clear 200ml 
Ronseal One Coat Water-Based Tile Paint - Granite Grey Satin 750ml 
ALM Code 4 Milled Lead - 300mm x 6m 
Bond It Cove-Mate Coving Adhesive - White EU3 
Bond It Superglue Activator Accelerator Spray Cyanoacrylate Aerosol - 400ml 
Estwing Hammer Curved Claw Smooth Face - 20oz 
Soudal Orange Skeleton Gun - Up to 400ml 
Timco 8 Spanner Set 
Code 6 Cast Lead - 450mm x 3m 
Everbuild General Purpose Silicone - Grey 280ml (Box of 12) 
Soudal Trade Sanitary Silicone - White 290ml 
Uses
Trade PU Construction Adhesive is perfect for both internal and external applications, and this is due to its resilience to both high humidity and weathering. It has excellent adhesion to wood and various construction materials, allowing the application of bonding window and door frames, even the corner connection, adhering to the EN204 requirements. Some of the surfaces this product can attach to include;
- MDF
- Wood
- Chipboard
- Concrete
- Metal
- Stone
- Plastics
- PU Foam
- Polystyrene Foam
- Mineral Wool
Preparation
Prepare the surface before commencing the application, and remove any contaminants that can hinder the adhesion of this product; this includes dirt, dust, oil, grease and similar impurities. This product achieves complete curing by exposure to the moisture in the air. You should slightly moisten the surface to optimise the adhesion; this also causes foam formation, enabling uneven surfaces to bond.
Application
- Cut the top of the cartridge, ensuring you do not damage the threaded screw.
- Screw the nozzle onto the cartridge and cut it at a 45° angle.
- Apply to the surface using a standard sealant gun on one of the two surfaces.
- Bring the two surfaces together within 5 minutes of application, and clamp for at least 15 minutes to achieve maximum strength.
Limitations
- This product is not suitable for application areas that are constantly immersed in water
- This product is unsuitable for PE, PP, PA, EPDM and Teflon
