Everbuild Stick2 Superglue De-Bonder - 20ml 
Bond It Cyanoacrylate Superglue Hi Viscosity - Clear 50g 
Ronseal Diamond Hard Floor Wax - Natural Oak 2.5L 
Bond It Contractors PVA - 25L White 
Everbuild Febond PVA - 5L 
Code 8 Cast Lead - 210mm x 3m 
Soudal 30 Min D4 Gel PU Wood Adhesive Trade - 290ml 
Everbuild Tecnic Foil Pack Gun 
Code 7 Cast Lead - 760mm x 3m 
Sika AnchorFix®-1 Fast Cure Anchoring Adhesive System - Light Grey 300ml 
Timloc Universal Slate Roof Vent Pipe Adaptor Kit 
Everbuild Bath & Kitchen Sealant – White 290ml 
Code 4 Cast Lead - 914mm x 6m 
ALM Code 8 Milled Lead - 914mm x 6m 
Soudal Genius Gun Building Adhesive 750ml - Champagne (Box of 12) 
Klober Profile-Line Flat Tile Vent - Antique Red KG9856-3-0116 (Box of 10) 
Everbuild EB25 Ultimate Sealant & Adhesive – Grey 300ml (Box of 12) 
FloPlast Half Round Downpipe 112° Bend, Black 
BORA - PM-4550 Adjustable Speedhorse XT 
Code 5 Cast Lead - 600mm x 3m 
Thompson's One Coat Patio & Block Paving Seal - 5L 
Everbuild Constructa-Pro Adhesive Foam - Grey 750ml 
Uses
The Trade Roof & Insulation Foam Genius is a convenient and superb product that provides outstanding polyurethane expanding foam delivered in a reusable container. The Genius Gun cap allows multiple uses out of the same can without concerns of clogging, allowing endless use. The product's formula is unrivalled, providing excellent value and thermal and acoustic insulation that's entirely freon-free. It's elastic, compressible, fast curing and suitable for use onto most common surfaces except PE, PP and PTFE.
Preparation
Due to the nature of this product, its expanding properties and excellent adhesion allow it to fill voids effectively. However, brushing the area is a good practice, as it removes any organic growth, small debris, dust, or grease.
Application
- Shake the can thoroughly for at least 20 seconds
- Open the cover and fold the tube perpendicular to the can
- Slightly moisten the surfaces with a water spray
- Fill the 1/3 of the void, allowing the expanding foam to fill the rest
- Ensure as you continue applying, you continue to shake the can in intervals
- If you're applying in layers, allow the one prior to cure, slightly moisten the surface and apply another layer on top
Limitations and Notes
- Any cured expanding foam must be removed mechanically.
- Uncured expanding foam can be wiped away with a wet cloth.
- Slightly moistened surfaces enhance curing, adhesive, and yield.
