Everbuild Standard Nozzle - 6 Pack (290mm & 310mm) 
Everbuild Forever Grey Silicone Sealant – 295ml 
Timco Flat Wood Bit 1/4" Extension Rod - 300mm 
Evo-Stik Impact Adhesive - 500ml 
Everbuild 506 Universal Contractors PVA - 5Kg White 
Easy-Trim Universal Dry Verge System Black (Pallet of 400) 
Bond It Rain-Mate All Weather Sealant - Black EU3 
Siroflex Trade Hand Held PU Expanding Foam 
ALM Code 5 Milled Lead - 180mm x 3m 
Everbuild Everflex Pyro Mate Fire Rated Silicone – White 295ml (Box of 12) 
Code 5 Cast Lead - 850mm x 3m 
FloPlast Universal Hopper, White – 65-68mm 
Code 7 Cast Lead - 150mm x 6m 
Ronseal Garden Furniture Restorer - 1L 
Everbuild Stixall Extreme Power - Black 290ml (Box of 12) 
Leadax Lead Free Flashing Alternative 150mm (6m rolls) 
OX Tools OX Pro Aluminium Kevlar Chalk Line Reel and Refill 
Everbuild 405 Path & Patio Seal – 5 Litre 
Cromar Roof Felt Adhesive - Black 2.5 Litre 
Uses
The Water Stop by Soudal is a fantastic repair solution for damaged roofs. It uses a solvent-based acrylate copolymer with synthetic fibres to securely bridge small cracks and damages. It's applied through a straightforward brush or, if it's raining, a spatula. Areas in which this product excels at repairing include roofs, gutters, cupolas, and general sealing of cracks and blisters. You may also use this to overlap large damages.
Preparation
Before commencing the application, ensure the surface is free from contaminants that can hinder the adhesion and performance of the product. Some of the impurities you need to eliminate include dirt, dust, grease, oil, loose debris, flaking material and organic growth. The best way to achieve this is by using a stiff brush, fungicide and a grease and oil remover. Very porous surface should be primed using the Water Stop diluted with 10-15% white spirit.
Application
- Any large damages to the surface should be filled using a Soudafalt or similar product.
- Use a brush or spatula (if applying underwater) and apply directly to the surface.
- If you need to apply more than one coat, allow eight days for the first to dry before applying the second.
