Youngman Double Section Roof Ladder 4.89m (57664600) 
Ronseal Stays White One Coat Non-Drip Paint - Satin 750ml 
Code 8 Cast Lead - 450mm x 6m 
Code 6 Cast Lead - 1600mm x 3m 
Soudal Orange Skeleton Gun - Up to 310ml 
Sika Dustproofer – Clear 5 Litre 
Everbuild Overlap & Border Adhesive - White 250g 
Everbuild External Frame Sealant - Brown 290ml (Box of 12) 
Estwing Roofers Pick Smooth Face Hammer - 21oz 
BORA Centipede 2ft x 4ft x 30in Unit - 4 X-Cups + 2 Clamp + C/S Bag 
Bond It Cover-It Hardfloor & Glass Protector - Blue 625mm X 25M 
Everbuild 501 PVA - 5 Litre 
Spax Pozi Pz3 Drill Bits - 25mm (Pack of 5) 
IKO Super Shed Felt - Black 8m Roll 
Everbuild 408 Super Seal - 5 Litre 
ALM Code 5 Milled Lead - 600mm x 3m 
SikaFlex EBT+ Polyurethane Adhesive & Sealant, Grey - 300ml (Box of 12) 
Everbuild Everflex 200 Contractors LMA Silicone - Black 295ml (Box of 25) 
Code 5 Cast Lead - 300mm x 3m 
Everbuild Lumberjack 5 Minute Wood Adhesive Deal 
ALM Code 3 Milled Lead - 850mm x 3m 
OB41 Silicone Lubricant Spray 400ml 
ERidge Dry Fix Ridge System Black – 6m Kit 
Bond It Bath Mate Bath & Kitchen Sealant - White EU3 Box of 25 
Soudal Brake Cleaner - 400ml 
Everbuild Lumberjack 550 Floor Adhesive – Buff 300ml 
Timco Round Wire Nails, Pack of 40 
Code 7 Cast Lead - 760mm x 3m 
Everbuild KOS Black Fire Cement - 1kg 
Uses
One Coat Waterseal by Thompson's offers excellent benefits for your brickwork, concrete or stone surface. It has a unique formula created from water-based, alkyl polysiloxane resin, delivering optimal substrate penetration. After application, water cannot damage the surface, and the resin combats the water, preventing it from seeping in and causing damage. The substrates you can apply this product include;
- Stone
- Concrete
- Brick
Preparation
Prepare the surface by brushing it with a stiff bristle brush, and any crack must be filled. Also, complete any pointing repairs required.
Application
- Give the tin a thorough shake.
- Apply using a brush or roller.
- Apply directly to the surface, and work from the bottom upwards if it is a vertical wall. Ensure you work in 1-metre sections to cover the area entirely.
- Ensure you coat the full area, mortar lines, and isolated areas, not just the walls.
Limitations
- Do not apply this product if the temperature in the air and surface is below 10°C
- This product is unsuitable to apply if it is raining or rain is imminent during the drying process.
- Do not use over masonry paint or on pre-painted surfaces.
- Some substrates may darken when treated.
- Do not use detergent to clean the surface that is being treated.
- This product should not be applied onto asphalt, synthetic fibres, plastics, natural rubber or wood.
- Ensure the application area is well-ventilated and prevent the product from frost.
- This product is only suitable for external use. Do not apply on floors, patios, ponds, roofs, garden retaining walls, below ground and damp-proof membranes where positive water pressure is likely.
