Everbuild Heavy Duty Double Sided Tape - 50mm x 5m 
Soudal Gap Filler Expanding Foam Genius Gun 300ml - Champagne 
Ronseal Expanding Foam Filler - 300ml 
SEAL PRO, Low Modulus Hybrid Universal Sanitary Sealant & Adhesive Bond, White - EU3 
Everbuild Stixall Extreme Power - Black 290ml (Box of 12) 
Klober Univeral Angle Ridge End - Grey 
Klober Permo Ultra 120 - 1m x 50m 
Ronseal Diamond Hard Floor Paint - Anthracite Satin 750ml 
Easy-Trim Lead R Flashing Textured – 150mm x 5m 
ALM Code 8 Milled Lead - 150mm x 6m 
ALM Code 7 Milled Lead - 1000mm x 3m 
OB41 Powerful Plastic Cleaner - 400ml 
FloPlast Half Round Gutter 90° Bend, White – 112mm 
Hambleside Danelaw TV15/7 Tile Vent - Brown (Box of 5) 
Code 3 Cast Lead - 510mm x 3m 
OX Tools Pro Self Levelling Laser Level - 60m 
FloPlast Half Round Internal Stop End, Black – 112mm 
Ulti-Mate Stonewold MkII Roof Tile Vent - Brown 
Code 7 Cast Lead - 914mm x 3m 
Easy-Trim Lead R Flashing Smooth – 600mm x 5m 
Bond It Cover-It Hardfloor & Glass Protector - Blue 625mm X 25M 
Timco Nut Mix Grab Pack - 980 Pieces 
ALM Code 5 Milled Lead - 1000mm x 3m 
Permavent Black Breather Membrane – 1m x 50m 
EVO-STIK Sticks Like All Weather Adhesive - Clear 290ml 
Armatool Slate Rip, Forged Steel 
Bond It Felt Adhesive - Black 2.5L Roof Felt Adhesives
Best Sellers
-
Code 4 Cast Lead – 600mm x 3m
£105.67 Incl VAT £88.06 Excl VAT Add to basket -
Code 8 Cast Lead – 1000mm x 6m
£691.15 Incl VAT £575.96 Excl VAT Add to basket -
Aluflow Downpipe Shoe – (Black, White and Grey)
From: £16.97 Incl VAT £14.14 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Corrapol GRP Polyester Corrugated Roof Sheet (950 x 2000mm)
£41.03 Incl VAT £34.19 Excl VAT Read more -
Code 8 Cast Lead – 360mm x 6m
£248.47 Incl VAT £207.06 Excl VAT Add to basket -
Soudal Exterior Frame Silicone – Brown 270ml
£7.99 Incl VAT £6.66 Excl VAT Add to basket
Roof Felt Adhesives
Browse through our range of roof felt adhesives. At ERoofing, we stock a substantial range of high-quality felt adhesive that come in ranging sizes from 1 litre to 25 litre.
Applying Felt Adhesive
You must apply felt adhesive either using a stiff brush, mop or squeegee. To avoid thickening in cold weather, stock the felt adhesive in a warm room before — for more straightforward application.
Cromar Roofing Felt Adhesive, in particular, should be applied to the surface and left for 15 to 30 minutes (depending upon drying conditions) to develop its full thickness.
The felt should then be placed into the wet adhesive film carefully, rubbing or rolling each section down to ensure highest contact with the adhesive and to expel air trapped between the surface and the felt. Wherever possible, the felt should be unrolled into the roofing felt adhesive and rolled with a light roller (15 to 25kg).
The overlaps should be at least 75mm on the side and 150mm at the ends. To ensure a complete bond at the side and end laps, Cromar Roofing Felt Adhesive can be applied to the underside of the felt and well compacted.
When using with a timber structure, the first layer of felt must be nailed down. Successive layers of felt may then be bonded using Cromar Roofing Felt Adhesive.
When used on concrete surfaces that are porous, it will be necessary to prime the surface first, ensuring that the primer is completely dry before the first layer of felt is applied.
Twenty-four hours after laying felt, check all bondings to ensure that full adhesive has been obtained. Mainly check all laps.
