Leather Roofers Tool & Nail Pouch, Dark Brown 
Soudal Neutral Stay Fresh Sanitary Silicone Sealant – Clear 300ml 
FloPlast Half Round Gutter 135° - Black 
Everbuild Everflex Premium+ 565 Clean Room Silicone – White 295ml (Box of 25) 
FloPlast Round 92½° Bend - Brown 
Soudal Silirub 2, White - 300ml (Box of 12) 
Everbuild Roof & Gutter Sealant - Black 295ml (Box of 12) 
ALM Code 8 Milled Lead - 390mm x 3m 
Ronseal One Coat Water-Based Tile Paint - Ivory Satin 750ml 
Ronseal Crystal Clear Outdoor Varnish - Satin 250ml 
SikaFlex EBT+ Polyurethane Adhesive & Sealant, White - 300ml (Box of 12) 
Everbuild Multi-Use Wonder Wipes Spray – 1 Litre 
Timco Mixed Cable Clips 
Code 7 Cast Lead - 600mm x 6m 
Soudal PVCu Gap Filler, White - 300ml (Box of 12) 
Lead Sheet Restorer - G1 
Code 8 Cast Lead - 360mm x 6m 
ALM Code 4 Milled Lead - 800mm x 3m 
Bulk pallet 125 packs - Classic Multi-Purpose Screws 4.0 x 50 Double Countersunk - A2 Stainless Steel - 200 Box 
Everbuild Everflex 195 Siliconised Acrylic Sealant - White 300ml 
ALM Code 6 Milled Lead Flashing - 760mm x 3m 
ALM Code 3 Milled Lead - 800mm x 6m 
OX Pro Jab Saw - 6.5" / 165mm & Holster Pack 
Klober 15x9 Tile Vent - Terracotta KG9690-0152 (Box of 10) 
Code 5 Cast Lead - 210mm x 3m 
Soudal Aquafix All Weather Sealant – Clear 300ml 
ALM Code 7 Milled Lead - 1600mm x 6m Roof Felt Adhesives
Best Sellers
-
Over Fascia Vent, 25mm Single
£6.10 Incl VAT £5.08 Excl VAT Add to basket -
OX Pro Series Adjustable Wrench Extra Wide Jaw
From: £18.62 Incl VAT £15.52 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Timco Mixed Carriage Bolts, Nuts and Washers Grab Pack
£19.99 Incl VAT £16.66 Excl VAT Add to basket -
Everbuild Coving Adhesive & Joint Filler – 290ml
£5.99 Incl VAT £4.99 Excl VAT Add to basket -
Ronseal Kitchen & Bathroom Touch-Up Enamel – 10ml
£16.26 Incl VAT £13.55 Excl VAT Add to basket -
Thompson’s Stain Block Damp Seal – White 250ml
£12.19 Incl VAT £10.16 Excl VAT Add to basket
Roof Felt Adhesives
Browse through our range of roof felt adhesives. At ERoofing, we stock a substantial range of high-quality felt adhesive that come in ranging sizes from 1 litre to 25 litre.
Applying Felt Adhesive
You must apply felt adhesive either using a stiff brush, mop or squeegee. To avoid thickening in cold weather, stock the felt adhesive in a warm room before — for more straightforward application.
Cromar Roofing Felt Adhesive, in particular, should be applied to the surface and left for 15 to 30 minutes (depending upon drying conditions) to develop its full thickness.
The felt should then be placed into the wet adhesive film carefully, rubbing or rolling each section down to ensure highest contact with the adhesive and to expel air trapped between the surface and the felt. Wherever possible, the felt should be unrolled into the roofing felt adhesive and rolled with a light roller (15 to 25kg).
The overlaps should be at least 75mm on the side and 150mm at the ends. To ensure a complete bond at the side and end laps, Cromar Roofing Felt Adhesive can be applied to the underside of the felt and well compacted.
When using with a timber structure, the first layer of felt must be nailed down. Successive layers of felt may then be bonded using Cromar Roofing Felt Adhesive.
When used on concrete surfaces that are porous, it will be necessary to prime the surface first, ensuring that the primer is completely dry before the first layer of felt is applied.
Twenty-four hours after laying felt, check all bondings to ensure that full adhesive has been obtained. Mainly check all laps.
