ALM Code 5 Milled Lead - 800mm x 6m 
Bond It Multi-Wipes For Hands, Tools & Surfaces - White 100 
Code 5 Cast Lead - 760mm x 3m 
Timloc Plain Tile Vent Terracotta (Box of 14) 
Isoflex Special Primer - 750ml 
Bond It Multi-Purpose Low Viscosity Spray Lubricant - 400ml Clear 
Bond It B2 Expanding PU Foam - Beige 750ml 
Code 8 Cast Lead - 390mm x 3m 
Thompson's Drive Seal - Black 5L 
Soudal Trade Sanitary Silicone - White 290ml (Box of 12) 
Everbuild P11 Central Heating System Cleanser – 1 Litre 
ALM Code 3 Milled Lead - 150mm x 6m 
Ronseal Exterior Yacht Varnish - Gloss 500ml 
OX Trade 3 Piece Paint Brush Set - 25/38/50mm 
Klober Adaptor For 20K Vents - KG979700 
Code 7 Cast Lead - 150mm x 3m 
Bond It Trowel Mastic - Black 5L 
D4 Wood Adhesive – 1 Litre 
OX Pro OX-P133855 Easy Start Handsaw 550mm / 22in 
ALM Code 4 Milled Lead - 760mm x 3m 
Bond It Frame-Mate Door & Window Sealant - Brown EU3 
OX Trade Metric Tape Measure - 8m 
Everbuild KOS Fire Cement Buff – 500g 
Cromar Bitumen Trowel Mastic - Black 2.5L 
Ronseal One Coat Water-Based Tile Paint - Cobalt Grey Gloss 750ml 
Klober Throat Adaptor - KG8000-3 
Everbuild Pinkgrip Dryfix FR – 750ml Roof Felt Adhesives
Best Sellers
-
FloPlast Half Round Gutter 135° – Black
£3.99 Incl VAT £3.33 Excl VAT Add to basket -
Predator Waterproof Work Safety Gloves – Red/Black
From: £4.99 Incl VAT £4.16 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Aluminium Roofing Soakers 6 Inch & 12 Inch (Width 3″ by 3″)
From: £12.95 Incl VAT £10.79 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Everbuild Silicone Eater Silicone Sealant Remover – 100ml (Box of 12)
£51.00 Incl VAT £42.50 Excl VAT Add to basket -
Spax T-Star Plus T30 Drill Bits – 25mm (Pack of 5)
£8.99 Incl VAT £7.49 Excl VAT Read more -
Everbuild Black Jack 904 Roof Felt Adhesive – 5 Litre
£24.99 Incl VAT £20.83 Excl VAT Add to basket
Roof Felt Adhesives
Browse through our range of roof felt adhesives. At ERoofing, we stock a substantial range of high-quality felt adhesive that come in ranging sizes from 1 litre to 25 litre.
Applying Felt Adhesive
You must apply felt adhesive either using a stiff brush, mop or squeegee. To avoid thickening in cold weather, stock the felt adhesive in a warm room before — for more straightforward application.
Cromar Roofing Felt Adhesive, in particular, should be applied to the surface and left for 15 to 30 minutes (depending upon drying conditions) to develop its full thickness.
The felt should then be placed into the wet adhesive film carefully, rubbing or rolling each section down to ensure highest contact with the adhesive and to expel air trapped between the surface and the felt. Wherever possible, the felt should be unrolled into the roofing felt adhesive and rolled with a light roller (15 to 25kg).
The overlaps should be at least 75mm on the side and 150mm at the ends. To ensure a complete bond at the side and end laps, Cromar Roofing Felt Adhesive can be applied to the underside of the felt and well compacted.
When using with a timber structure, the first layer of felt must be nailed down. Successive layers of felt may then be bonded using Cromar Roofing Felt Adhesive.
When used on concrete surfaces that are porous, it will be necessary to prime the surface first, ensuring that the primer is completely dry before the first layer of felt is applied.
Twenty-four hours after laying felt, check all bondings to ensure that full adhesive has been obtained. Mainly check all laps.
