Everbuild Evercryl One Coat Grey – 20kg 
Timco Precision Screwdriver Set 6pcs 
Kwik Flash Lead Tool - Turn In Setting Tool For Lead & Zinc Flashing 
Soudal Gap Filler Expanding Foam Genius Gun 300ml - Champagne 
Timco Classic Pozi Multi-Purpose Screws - Mixed Tray 
Ronseal Precision Finish Brush - 2.5 Inch 
Bond It Lightweight Render Mesh - 50m x 1m (Pink) 
ALM Code 6 Milled Lead Flashing- 1000mm x 6m 
Thompson's Emergency Roof Repair Mastic - Black 750ml 
OB41 Fast Tack Contact Adhesive Spray - 500ml 
Bond It Decking Cleaner - Clear 5L 
ALM Code 8 Milled Lead - 510mm x 3m 
Bostik Builder Tape, 50mm - 25m 
Everbuild Forever Grey Silicone Sealant – 295ml 
ALM Code 3 Milled Lead - 1200mm x 3m 
Bond It PVA & Adhesive Sealer White 1L - Box of 12 
Ulti-Mate Plain Tile Vent Adaptor 
FloPlast Square Line Shoe Black – 65mm 
Resiblock Indian Sandstone Sealer Invisible - 5 Litre 
Bond It A70 Studlock Anaerobic High Strength Adhesive - 50ml Green 
Sika Stone Protector - Clear 5 Litre 
Everbuild Black Jack 901 Black Bitumen Paint – 5 Litre 
FloPlast Square Gutter 90° Bend - White 
Everflex Contract 125 One Hour Caulk, White - 300ml (Box of 25) 
Code 5 Cast Lead - 1000mm x 6m Roof Felt Adhesives
Best Sellers
-
Ronseal One Coat Water-Based Tile Paint – Black Satin 750ml
£21.99 Incl VAT £18.33 Excl VAT Add to basket -
Bond It Aluminium Solar Reflective Paint – Silver 5L
£34.99 Incl VAT £29.16 Excl VAT Add to basket -
Soudal Repair Express Cement – Beige 290ml (Box of 12)
£33.96 Incl VAT £28.30 Excl VAT Add to basket -
FloPlast Half Round Running Outlet, White
£5.99 Incl VAT £4.99 Excl VAT Add to basket -
JCB Hydromaster Wellington
From: £24.34 Incl VAT £20.28 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
You Save
£4.50
Everbuild Mammoth Packaging Tape – 48mm x 50m
Was:£6.99Incl VAT£2.49 Incl VAT £2.08 Excl VAT Add to basket
Roof Felt Adhesives
Browse through our range of roof felt adhesives. At ERoofing, we stock a substantial range of high-quality felt adhesive that come in ranging sizes from 1 litre to 25 litre.
Applying Felt Adhesive
You must apply felt adhesive either using a stiff brush, mop or squeegee. To avoid thickening in cold weather, stock the felt adhesive in a warm room before — for more straightforward application.
Cromar Roofing Felt Adhesive, in particular, should be applied to the surface and left for 15 to 30 minutes (depending upon drying conditions) to develop its full thickness.
The felt should then be placed into the wet adhesive film carefully, rubbing or rolling each section down to ensure highest contact with the adhesive and to expel air trapped between the surface and the felt. Wherever possible, the felt should be unrolled into the roofing felt adhesive and rolled with a light roller (15 to 25kg).
The overlaps should be at least 75mm on the side and 150mm at the ends. To ensure a complete bond at the side and end laps, Cromar Roofing Felt Adhesive can be applied to the underside of the felt and well compacted.
When using with a timber structure, the first layer of felt must be nailed down. Successive layers of felt may then be bonded using Cromar Roofing Felt Adhesive.
When used on concrete surfaces that are porous, it will be necessary to prime the surface first, ensuring that the primer is completely dry before the first layer of felt is applied.
Twenty-four hours after laying felt, check all bondings to ensure that full adhesive has been obtained. Mainly check all laps.
