ALM Code 3 Milled Lead - 300mm x 3m 
Bond It PVA & Adhesive Sealer White 1L - Box of 12 
ALM Code 5 Milled Lead - 1200mm x 6m 
Gorilla Tape - Black (48mm x 32m) 
Thompson's Emergency Instant Repair Aerosol - Black 450ml 
Pro Magnetic Combination Square - 300mm 
FloPlast Universal Hopper, Brown – 65-68mm 
Bond It Bitumen Paint - Black 1L 
Everbuild Seal Rite Strip / Smooth Out Twin Pack 
Timloc Single Pantile Tile Vent Brown (Box of 11) 
Code 7 Cast Lead - 1000mm x 3m 
Timco Premium Dry Diamond Core Drill Kit 5pcs 
Bond It Saves Nails Instant Grab Adhesive - EU3 Beige 
FloPlast Half Round Downpipe Shoe, Brown – 68mm 
Code 5 Cast Lead - 210mm x 6m 
Everbuild P13 Plumbers Putty - Beige 750g 
SikaMur InjectoCream-100 - White 300ml 
Code 4 Cast Lead - 210mm x 3m 
Timloc Non-Profile Tile Vent Red (Box of 8) 
Bond It Trowel Mastic - Black 5L 
ALM Code 7 Milled Lead - 390mm x 6m 
Klober Universal Tile Vent Antique Red KG9854 (Box of 10) 
OX Tools Diamond Blade Triple Pack 115/22.23mm 
ALM Code 4 Milled Lead - 1000mm x 3m 
Klober Regent Tile Vent KG6084, Dark Brown 
Code 8 Cast Lead - 510mm x 3m 
Soudal Adhesive Remover - 400ml 
ALM Code 8 Milled Lead - 150mm x 6m 
Klober 20K Slate Vent KG9795-0429 Slate Grey 
Bond It Patination Oil 1L 
Everbuild Black Jack 904 Roof Felt Adhesive – 25 Litre 
Ronseal Exterior Yacht Varnish - Gloss 2.5L 
FloPlast Square Line External Stop End Black – 114mm 
Bond It Aluminium Solar Reflective Paint - Silver 5L 
Permavent Black Breather Membrane – 1m x 20m 
Timco Chalk Line Set 
FloPlast Half Round External Stop End, White – 112mm Roof Felt Adhesives
Best Sellers
-
Ultra Crete SCJ Bitumen Cold Joint Sealer – 750ml
£17.99 Incl VAT £14.99 Excl VAT Read more -
Everflex Premium+ 450 Builders Silicone – Translucent 300ml (Box of 25)
£120.75 Incl VAT £100.63 Excl VAT Read more -
OX Pro Magnetic Level 600mm
£47.98 Incl VAT £39.98 Excl VAT Add to basket -
OX Tools Pro Stainless Steel Plasterers Trowel
From: £28.99 Incl VAT £24.16 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
OX Trade Torpedo Level 230mm / 9in
£14.99 Incl VAT £12.49 Excl VAT Add to basket -
Spax Pozi Pz1 Drill Bits – 25mm (Pack of 5)
£7.49 Incl VAT £6.24 Excl VAT Add to basket
Roof Felt Adhesives
Browse through our range of roof felt adhesives. At ERoofing, we stock a substantial range of high-quality felt adhesive that come in ranging sizes from 1 litre to 25 litre.
Applying Felt Adhesive
You must apply felt adhesive either using a stiff brush, mop or squeegee. To avoid thickening in cold weather, stock the felt adhesive in a warm room before — for more straightforward application.
Cromar Roofing Felt Adhesive, in particular, should be applied to the surface and left for 15 to 30 minutes (depending upon drying conditions) to develop its full thickness.
The felt should then be placed into the wet adhesive film carefully, rubbing or rolling each section down to ensure highest contact with the adhesive and to expel air trapped between the surface and the felt. Wherever possible, the felt should be unrolled into the roofing felt adhesive and rolled with a light roller (15 to 25kg).
The overlaps should be at least 75mm on the side and 150mm at the ends. To ensure a complete bond at the side and end laps, Cromar Roofing Felt Adhesive can be applied to the underside of the felt and well compacted.
When using with a timber structure, the first layer of felt must be nailed down. Successive layers of felt may then be bonded using Cromar Roofing Felt Adhesive.
When used on concrete surfaces that are porous, it will be necessary to prime the surface first, ensuring that the primer is completely dry before the first layer of felt is applied.
Twenty-four hours after laying felt, check all bondings to ensure that full adhesive has been obtained. Mainly check all laps.
