Code 7 Cast Lead - 300mm x 3m 
Code 6 Cast Lead - 850mm x 6m 
Armatool Slate Rip, Forged Steel 
Easy-Trim Universal Dry Verge Unit - Black 
OX Pro Chalk Refill, Blue - 226g 
Ronseal Stays White 2in1 Paint & Primer - Gloss 2.5L 
Ronseal Fence Life Brush - 4" 
OX Tools 12 inch / 300mm Trade Plastic Plasterers Mud Pan 
Cromar Bitumen Primer – Black 2.5 Litre 
Bond It Cove-Mate Coving Adhesive - White EU3 
Soudal Grab Solvent Based Adhesive, Beige 
Code 5 Cast Lead - 1000mm x 3m 
Sikagard Woodworm Killer - 5 Litre 
Everbuild Everflex Heat Mate Sealant - Red 295ml 
Bostik Brushable Waterproofer - Black 5L 
Ronseal Crystal Clear Outdoor Varnish - Matt 2.5L 
Soudal Sealant Remover – 400ml 
Soudal Construction Silicone, Grey - 290ml (Box of 12) 
Spax Phillips Ph1 Drill Bits - 25mm (Pack of 5) 
OX Pro 6 Piece Bricklayers Set 
OX Pro Brick Trowel Philadelphia Pattern - 10"/250mm 
Ronseal One Coat Stain Block - White 750ml 
Thompson's Stain Block Damp Seal - White 250ml 
OB41 Cut Tap Drill Fluid - 400ml 
Cromar Black Bitumen Paint – 1 Litre 
Timco Screwdriver 6-Tool Set Roof Felt Adhesives
Best Sellers
-
Ronseal Direct to Metal Paint – Satin 2.5L
From: £39.99 Incl VAT £33.33 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
ALUKAP-XR Ridge Channel Snap Cover, White or Brown
From: £25.48 Incl VAT £21.23 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
DeWalt FLEXTORQ Set PZ2 + Drive Guide in Small Bulk Storage Case
£16.99 Incl VAT £14.16 Excl VAT Add to basket -
Siroflex Trade Acrylic Decorators Caulk – 300ml
£9.49 Incl VAT £7.91 Excl VAT Add to basket -
Code 4 Cast Lead – 210mm x 6m
£74.26 Incl VAT £61.88 Excl VAT Add to basket -
Everbuild Black Jack 907 Solar Reflective Paint – 25 Litre
£153.06 Incl VAT £127.55 Excl VAT Read more
Roof Felt Adhesives
Browse through our range of roof felt adhesives. At ERoofing, we stock a substantial range of high-quality felt adhesive that come in ranging sizes from 1 litre to 25 litre.
Applying Felt Adhesive
You must apply felt adhesive either using a stiff brush, mop or squeegee. To avoid thickening in cold weather, stock the felt adhesive in a warm room before — for more straightforward application.
Cromar Roofing Felt Adhesive, in particular, should be applied to the surface and left for 15 to 30 minutes (depending upon drying conditions) to develop its full thickness.
The felt should then be placed into the wet adhesive film carefully, rubbing or rolling each section down to ensure highest contact with the adhesive and to expel air trapped between the surface and the felt. Wherever possible, the felt should be unrolled into the roofing felt adhesive and rolled with a light roller (15 to 25kg).
The overlaps should be at least 75mm on the side and 150mm at the ends. To ensure a complete bond at the side and end laps, Cromar Roofing Felt Adhesive can be applied to the underside of the felt and well compacted.
When using with a timber structure, the first layer of felt must be nailed down. Successive layers of felt may then be bonded using Cromar Roofing Felt Adhesive.
When used on concrete surfaces that are porous, it will be necessary to prime the surface first, ensuring that the primer is completely dry before the first layer of felt is applied.
Twenty-four hours after laying felt, check all bondings to ensure that full adhesive has been obtained. Mainly check all laps.
