Code 6 Cast Lead - 600mm x 6m 
Soudal Neoprene Contact Adhesive Liquid Glue 44A – 50ml 
Ronseal Exterior Yacht Varnish - Gloss 2.5L 
Everbuild 701 Non-Slip Tile Adhesive – White 7.5kg 
ALM Code 8 Milled Lead - 360mm x 3m 
ALM Code 4 Milled Lead - 914mm x 3m 
Soudal Construction Silicone, Grey - 290ml (Box of 12) 
Over Fascia Vent, 10mm 
Code 4 Cast Lead - 1200mm x 3m 
Everbuild 204 Evermix 3 in 1 - 5 Litre 
Freeflow 68mm Round Down Pipe Shoe - Black 
FaithFull Soft Grip Chisel - 4 Piece Set 
Everbuild Everflex 195 Siliconised Acrylic Sealant - White 300ml 
Ronseal Diamond Hard Floor Wax - Natural Oak 2.5L 
Cromar Bitumen Trowel Mastic - Black 5L 
ALM Code 6 Milled Lead Flashing - 390mm x 6m 
Everbuild Anchorset Green 150 - Grey 150ml 
FloPlast Half Round Downpipe Branch 67.5°, Black 
Stanley Dynagrip Chisel Knife - 25mm 
FloPlast Square External Stopend - White 
Bond It Contractors PVA - 5L White 
OX Pro Small Trowel - 200 x 75mm 
Code 8 Cast Lead - 240mm x 3m 
Bond It Silicone Release Spray - 500ml Clear (Mould Releasing Lubricant) 
OX Pro Brick Hammer - 24 oz 
Bond It The Beast PU Adhesive - Brown 150ml 
Hambleside Danelaw TV15/1 Flush Fitting Tile Vent - Brown (Box of 5) 
Timloc Castellated Tile Vent Grey (Box of 8) Roof Felt Adhesives
Best Sellers
-
ALM Code 5 Milled Lead – 360mm x 6m
£155.76 Incl VAT £129.80 Excl VAT Add to basket -
ALUKAP-SS Low Profile L-Cap, White or Brown
From: £67.48 Incl VAT £56.23 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
OX Pro Chalk Refill, Red – 226g
£7.99 Incl VAT £6.66 Excl VAT Add to basket -
Everbuild Everflex Premium+ 565 Clean Room Silicone – White 295ml (Box of 25)
£199.75 Incl VAT £166.46 Excl VAT Add to basket -
Restec Flexitec 2020 Powder Hardener – 1kg
£43.99 Incl VAT £36.66 Excl VAT Read more -
500 x Felt Support Trays 1.5m (Half Pallet)
£810.00 Incl VAT £675.00 Excl VAT Add to basket
Roof Felt Adhesives
Browse through our range of roof felt adhesives. At ERoofing, we stock a substantial range of high-quality felt adhesive that come in ranging sizes from 1 litre to 25 litre.
Applying Felt Adhesive
You must apply felt adhesive either using a stiff brush, mop or squeegee. To avoid thickening in cold weather, stock the felt adhesive in a warm room before — for more straightforward application.
Cromar Roofing Felt Adhesive, in particular, should be applied to the surface and left for 15 to 30 minutes (depending upon drying conditions) to develop its full thickness.
The felt should then be placed into the wet adhesive film carefully, rubbing or rolling each section down to ensure highest contact with the adhesive and to expel air trapped between the surface and the felt. Wherever possible, the felt should be unrolled into the roofing felt adhesive and rolled with a light roller (15 to 25kg).
The overlaps should be at least 75mm on the side and 150mm at the ends. To ensure a complete bond at the side and end laps, Cromar Roofing Felt Adhesive can be applied to the underside of the felt and well compacted.
When using with a timber structure, the first layer of felt must be nailed down. Successive layers of felt may then be bonded using Cromar Roofing Felt Adhesive.
When used on concrete surfaces that are porous, it will be necessary to prime the surface first, ensuring that the primer is completely dry before the first layer of felt is applied.
Twenty-four hours after laying felt, check all bondings to ensure that full adhesive has been obtained. Mainly check all laps.
