Bond It Aerosol Spray Adhesive - 500ml Beige 
Klober Universal Vent 125mm Adaptor - KG979000-1 
Everbuild Clear Fix – 290ml 
Bond It All Weather Roofing Compound - Black 5L 
Everbuild Professional Sealant Gun - C3 (280ml - 310ml) 
Roughneck® V-Series Axe - 20oz/0.6kg 
Everbuild Plumbers Gold Sealant – Clear 290ml (Box of 12) 
Timco 30mm Cladding Pin - 250 Pieces 
Bond It Foil Safe Solvent Cleaner - Clear 1L 
FloPlast Half Round Downpipe Branch 67.5°, Brown 
Thompson's One Coat Patio & Block Paving Seal - 5L 
Ronseal Exterior Multi-Purpose Smooth Finish Filler - Grey 330g 
Code 6 Cast Lead - 150mm x 3m 
Timco Screwdriver 6-Tool Set 
Timco Straight Tower Bolt Black 6" Gate Bolt 
Everbuild Stick2 Industrial Superglue HV – Clear 50g (Box of 25) 
Bond It Bitumen Primer - Black 25L 
Hambleside Danelaw Double Roman Tile Vent TV15/3 - Antique Red (Box of 5) 
Bond It Aluminium Foil Tape - 100mm x 45M (Box of 12) 
Ronseal Interior Varnish - Clear Gloss 2.5L 
Hambleside Danelaw Felt Lap Vent 
Code 7 Cast Lead - 510mm x 6m 
Hambleside Danelaw TV15/1 Flush Fitting Tile Vent - Brown (Box of 5) 
ALM Code 6 Milled Lead Flashing - 850mm x 3m 
Timloc Double Pantile Tile Vent Grey (Box of 6) 
Everbuild Pinkgrip SF But It’s White – 380ml (Box of 12) 
Timco Screwdriver 8-Tool Set 
Hambleside Danelaw TV10/6 Flush Fit Tile Vent - Black (Box of 5) Roof Felt Adhesives
Best Sellers
-
Everbuild Professional Sealant Gun – C4 (290 – 380ml)
£10.99 Incl VAT £9.16 Excl VAT Add to basket -
Restec Flexitec 2020 Powder Hardener – 1kg
£43.99 Incl VAT £36.66 Excl VAT Read more -
Everbuild Forever Clear Silicone Sealant – 295ml
£6.50 Incl VAT £5.42 Excl VAT Add to basket -
Cromar ProRidge Universal Ridge System – 6m Kit
£34.99 Incl VAT £29.16 Excl VAT Add to basket -
Everbuild Everflex Contract 700T LMN Silicone – Translucent (Box of 25)
£125.00 Incl VAT £104.17 Excl VAT Add to basket -
ALUKAP-XR Lantern Pinnacle Top Cap, RAL Powder Coat
£278.51 Incl VAT £232.09 Excl VAT Read more
Roof Felt Adhesives
Browse through our range of roof felt adhesives. At ERoofing, we stock a substantial range of high-quality felt adhesive that come in ranging sizes from 1 litre to 25 litre.
Applying Felt Adhesive
You must apply felt adhesive either using a stiff brush, mop or squeegee. To avoid thickening in cold weather, stock the felt adhesive in a warm room before — for more straightforward application.
Cromar Roofing Felt Adhesive, in particular, should be applied to the surface and left for 15 to 30 minutes (depending upon drying conditions) to develop its full thickness.
The felt should then be placed into the wet adhesive film carefully, rubbing or rolling each section down to ensure highest contact with the adhesive and to expel air trapped between the surface and the felt. Wherever possible, the felt should be unrolled into the roofing felt adhesive and rolled with a light roller (15 to 25kg).
The overlaps should be at least 75mm on the side and 150mm at the ends. To ensure a complete bond at the side and end laps, Cromar Roofing Felt Adhesive can be applied to the underside of the felt and well compacted.
When using with a timber structure, the first layer of felt must be nailed down. Successive layers of felt may then be bonded using Cromar Roofing Felt Adhesive.
When used on concrete surfaces that are porous, it will be necessary to prime the surface first, ensuring that the primer is completely dry before the first layer of felt is applied.
Twenty-four hours after laying felt, check all bondings to ensure that full adhesive has been obtained. Mainly check all laps.
