Ronseal Knot Block Primer & Undercoat - White 2.5L 
Everbuild Stixall Extreme Power - Clear 290ml (Box of 12) 
OX Pro Gauging Trowel - 7" / 180mm 
ALM Code 4 Milled Lead - 300mm x 3m 
Everbuild Resiblock Trade – Clear 5 Litre 
Ulti-Mate Plain Tile Vent Adaptor 
ALM Code 5 Milled Lead - 390mm x 3m 
Soudal Butyrub Non-Setting Mastic - Black 300ml 
Ronseal One Coat Water-Based Tile Paint - Black Satin 750ml 
Code 6 Cast Lead - 1200mm x 6m 
Everbuild 703 Fix & Grout Tile Adhesive - White 750g 
FloPlast Square Union Unit - White 
Ronseal Multi Purpose Filler Smooth Finish Powder - 2Kg 
Ronseal Diamond Hard Doorstep Paint - Tile Red Satin 750ml 
Everbuild 206 Strike Release Oil – 5 Litre 
Ronseal Exterior Yacht Varnish - Gloss 2.5L 
OX Pro 5 Piece Wood Chisel Set in Velcro Case 
Soudaseal Mirror Light Grey, 290ml 
Armatool Leather Belt Black, Large 
Bond It Saves Nails Solvent-Free - White EU3 
ALM Code 7 Milled Lead - 760mm x 6m 
Siroflex Trade Hand Held PU Expanding Foam 
Code 8 Cast Lead - 510mm x 3m 
Easy-Trim Universal Dry Verge System Terracotta (Box of 50) 
Everbuild P18 Gas Leak Detector - 400ml 
Hambleside Danelaw TV15/7 Tile Vent - Antique Red (Box of 5) 
FloPlast Half Round Union Unit - Black 
Easy-Trim Patination Oil - 1 Litre 
Soudal Genius Gun Plasterboard Adhesive - 750ml 
Ronseal Stays White Ultra Tough White Matt Paint - 2.5L 
ALM Code 3 Milled Lead - 360mm x 6m 
Soudal Genius Gun Plasterboard Adhesive - 750ml (Box of 12) 
Soudal Soudafoam Gap Filler Hand Held 750ml (Box of 12) Roof Felt Adhesives
Best Sellers
-
Hambleside Danelaw Single Plain Roof Tile Vent TV10/5
From: £16.99 Incl VAT £14.16 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
ALM Code 8 Milled Lead – 360mm x 3m
£121.78 Incl VAT £101.48 Excl VAT Add to basket -
Code 4 Cast Lead – 914mm x 6m
£319.87 Incl VAT £266.56 Excl VAT Add to basket -
Gorilla Super Glue Gel – Clear 15g
£12.99 Incl VAT £10.83 Excl VAT Read more -
FaithFull Heavy Duty Bucket – Black 14L
£3.49 Incl VAT £2.91 Excl VAT Read more -
Everbuild Masonry Dry Rot Treatment – 5 Litre
£21.99 Incl VAT £18.33 Excl VAT Add to basket
Roof Felt Adhesives
Browse through our range of roof felt adhesives. At ERoofing, we stock a substantial range of high-quality felt adhesive that come in ranging sizes from 1 litre to 25 litre.
Applying Felt Adhesive
You must apply felt adhesive either using a stiff brush, mop or squeegee. To avoid thickening in cold weather, stock the felt adhesive in a warm room before — for more straightforward application.
Cromar Roofing Felt Adhesive, in particular, should be applied to the surface and left for 15 to 30 minutes (depending upon drying conditions) to develop its full thickness.
The felt should then be placed into the wet adhesive film carefully, rubbing or rolling each section down to ensure highest contact with the adhesive and to expel air trapped between the surface and the felt. Wherever possible, the felt should be unrolled into the roofing felt adhesive and rolled with a light roller (15 to 25kg).
The overlaps should be at least 75mm on the side and 150mm at the ends. To ensure a complete bond at the side and end laps, Cromar Roofing Felt Adhesive can be applied to the underside of the felt and well compacted.
When using with a timber structure, the first layer of felt must be nailed down. Successive layers of felt may then be bonded using Cromar Roofing Felt Adhesive.
When used on concrete surfaces that are porous, it will be necessary to prime the surface first, ensuring that the primer is completely dry before the first layer of felt is applied.
Twenty-four hours after laying felt, check all bondings to ensure that full adhesive has been obtained. Mainly check all laps.
