OX Pro Tile Nippers 200MM / 8" 
Isoflex Clean Up Fluid - 500ml 
Soudafoam Gap Filler Genius Gun - 600ml 
OB41 Cut Tap Drill Fluid - 400ml 
Ronseal 5 Minute Multi-Purpose Smooth Finish Filler - 290ml 
Timco Driver and Ground Jobber Bit Set 
Everbuild Multi-Use Monster Wonder Wipes Tub (500 Wipes) 
Hedgehog Gutter Brush Leaf Guard Black - 4m x 200mm (Pallet of 24) 
Bostik Flexacryl Instant Repair Waterproofing - Grey 5kg 
OX Trade Jab Saw - 6.5" / 165mm & Holster Pack 
Gorilla Tape - Black (48mm x 32m) 
Evo-Stik 528 Instant Contact Adhesive – 1 Litre 
Everbuild Anchorset Green 150 - Grey 150ml 
FloPlast Half Round Running Outlet, White 
Everbuild Multi-Use Wonder Wipes Tub (Box of 12) 
Ronseal One Coat Blackboard Paint - Black 250ml 
Code 3 Cast Lead - 914mm x 6m 
Soudal Acetoxy Stay Fresh Sanitary Silicone Sealant – Ice White 290ml 
ALM Code 8 Milled Lead - 390mm x 6m 
Soudal Soudafoam Gap Filler Hand Held 750ml 
ALM Code 3 Milled Lead - 240mm x 3m 
Ronseal Exterior Yacht Varnish - Gloss 2.5L 
Soudal Silirub 2, White - 300ml (Box of 12) Roof Felt Adhesives
Best Sellers
-
Hambleside Danelaw TV15/7 Tile Vent – Brown (Box of 5)
£114.99 Incl VAT £95.83 Excl VAT Add to basket -
ALM Code 7 Milled Lead – 1600mm x 3m
£484.27 Incl VAT £403.56 Excl VAT Add to basket -
Code 6 Cast Lead – 1600mm x 3m
£411.26 Incl VAT £342.72 Excl VAT Add to basket -
Everbuild Stick2 Carpet Fix Spray – 500ml
£3.99 Incl VAT £3.33 Excl VAT Add to basket -
Code 5 Cast Lead – 760mm x 6m
£331.30 Incl VAT £276.08 Excl VAT Add to basket -
OX Tools Trade Spirit Level
From: £19.99 Incl VAT £16.66 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page
Roof Felt Adhesives
Browse through our range of roof felt adhesives. At ERoofing, we stock a substantial range of high-quality felt adhesive that come in ranging sizes from 1 litre to 25 litre.
Applying Felt Adhesive
You must apply felt adhesive either using a stiff brush, mop or squeegee. To avoid thickening in cold weather, stock the felt adhesive in a warm room before — for more straightforward application.
Cromar Roofing Felt Adhesive, in particular, should be applied to the surface and left for 15 to 30 minutes (depending upon drying conditions) to develop its full thickness.
The felt should then be placed into the wet adhesive film carefully, rubbing or rolling each section down to ensure highest contact with the adhesive and to expel air trapped between the surface and the felt. Wherever possible, the felt should be unrolled into the roofing felt adhesive and rolled with a light roller (15 to 25kg).
The overlaps should be at least 75mm on the side and 150mm at the ends. To ensure a complete bond at the side and end laps, Cromar Roofing Felt Adhesive can be applied to the underside of the felt and well compacted.
When using with a timber structure, the first layer of felt must be nailed down. Successive layers of felt may then be bonded using Cromar Roofing Felt Adhesive.
When used on concrete surfaces that are porous, it will be necessary to prime the surface first, ensuring that the primer is completely dry before the first layer of felt is applied.
Twenty-four hours after laying felt, check all bondings to ensure that full adhesive has been obtained. Mainly check all laps.
