OX Tools 600/1200/1800mm Pro Spirit Level Set with Bag 
ALM Code 3 Milled Lead - 210mm x 6m 
Code 6 Cast Lead - 210mm x 3m 
FloPlast Half Round Gutter Union, Brown 
Timco Square Twist Nails - Galvanised (40 x 3.75mm) 1kg 
Code 8 Cast Lead - 1000mm x 3m 
Bond It D4 Professional Wood Adhesive - Clear 1L (Box of 12) 
Everflex Contract 125 One Hour Caulk, Brown - 300ml (Box of 25) 
Easy-Trim Over Fascia Vent - 10mm x 1m 
Code 7 Cast Lead - 800mm x 3m 
Soudal Butyrub Non-Setting Mastic - Grey 300ml 
OX Tools OX Trade Hickory Handle Claw Hammer - 16oz/450g 
ALM Code 8 Milled Lead - 390mm x 6m 
Everbuild Lumberjack 550 Floor Adhesive – 600ml 
Bond It B2 Expanding PU Gun Grade Foam - Beige 750ml 
Siroflex SX Contractors LMN Silicone OAK 300ml 
Klober Universal Vent 110mm Adaptor - KG968300-1 
SikaBond Waterproof PVA – 5 Litre 
Everbuild Standard Nozzle - 6 Pack (290mm & 310mm) 
OX Tools Pro Combination Square 300mm / 12in 
Soudal Brake Cleaner - 400ml 
FloPlast Half Round Downpipe Socket, Black 
Ronseal Precision Finish Brush - 1 Inch Angled 
Cromar Black Bitumen Paint - 5 Litre 
Estwing Hammer Curved Claw Smooth Face - 20oz Roof Felt Adhesives
Best Sellers
-
Everbuild Tecnic Joint Backer Rod – 15mm x 10m (Box of 12)
£131.88 Incl VAT £109.90 Excl VAT Read more -
FloPlast Square to Round Downpipe Adaptor – Brown
£3.19 Incl VAT £2.66 Excl VAT Add to basket -
Evo-Stik 1 Hour Shower Sealant, Clear – 310ml
£11.05 Incl VAT £9.21 Excl VAT Read more -
Code 4 Cast Lead – 800mm x 6m
£279.89 Incl VAT £233.24 Excl VAT Add to basket -
Klober Double Pantile Vent – Terracotta KG9858-3-0152 (Box of 10)
£215.99 Incl VAT £179.99 Excl VAT Add to basket -
Timloc 1206 Underfloor Vent Horizontal Rear Extension + 100mm
£6.99 Incl VAT £5.83 Excl VAT Add to basket
Roof Felt Adhesives
Browse through our range of roof felt adhesives. At ERoofing, we stock a substantial range of high-quality felt adhesive that come in ranging sizes from 1 litre to 25 litre.
Applying Felt Adhesive
You must apply felt adhesive either using a stiff brush, mop or squeegee. To avoid thickening in cold weather, stock the felt adhesive in a warm room before — for more straightforward application.
Cromar Roofing Felt Adhesive, in particular, should be applied to the surface and left for 15 to 30 minutes (depending upon drying conditions) to develop its full thickness.
The felt should then be placed into the wet adhesive film carefully, rubbing or rolling each section down to ensure highest contact with the adhesive and to expel air trapped between the surface and the felt. Wherever possible, the felt should be unrolled into the roofing felt adhesive and rolled with a light roller (15 to 25kg).
The overlaps should be at least 75mm on the side and 150mm at the ends. To ensure a complete bond at the side and end laps, Cromar Roofing Felt Adhesive can be applied to the underside of the felt and well compacted.
When using with a timber structure, the first layer of felt must be nailed down. Successive layers of felt may then be bonded using Cromar Roofing Felt Adhesive.
When used on concrete surfaces that are porous, it will be necessary to prime the surface first, ensuring that the primer is completely dry before the first layer of felt is applied.
Twenty-four hours after laying felt, check all bondings to ensure that full adhesive has been obtained. Mainly check all laps.
