Soudal Trade Sanitary Silicone - White 290ml (Box of 12) 
Soudal Soudatherm Roof 250 - 800ml 
Everbuild Black Jack 902 Bitumen & Flashing Primer – 5 Litre 
OX Tough Builders Socks (UK 6-11) 
ALM Code 8 Milled Lead - 600mm x 3m 
Everbuild Patio Wizard – 1 Litre 
Felt Support Tray – 1.5m 
FloPlast Round Shoe - White 
Code 7 Cast Lead - 150mm x 6m 
Timco FirmaHold Collated Brad A2 Stainless Steel Nails - 16G x 50mm (2000 Pieces) 
Timco Lifting Sling 3000kg Limit - 2m x 90mm 
Everbuild Seal Rite Strip Out Tool 
Ronseal One Coat Stays White Radiator Paint - Satin 750ml 
OX Trade 3 Piece Paint Brush Set - 25/38/50mm 
BOND IT Power Mix Concentrated Liquid Mortar Plasticiser - 500ml Brown 
Klober Regent Tile Vent KG6084, Grey 
Soudal Handheld Gap Filler Expanding Foam - Champagne 750ml 
FloPlast Round Line Downpipe Clip, White 
Code 5 Cast Lead - 760mm x 3m 
Thompson's Emergency Roof Repair Mastic - Black 750ml 
ALM Code 4 Milled Lead - 210mm x 3m 
Bond It Bitumen Primer - Black 5L 
Armatool Flooring Kneepads 
Hambleside Danelaw Double Plain Tile Vent, TV10/9 - Slate Grey (Box of 5) 
FloPlast Square Line Gutter Angle 135° Black 
Code 3 Cast Lead - 180mm x 6m Roof Felt Adhesives
Best Sellers
-
Code 6 Cast Lead – 600mm x 6m
£308.45 Incl VAT £257.04 Excl VAT Add to basket -
Ronseal Diamond Hard Doorstep Paint – Black Satin 250ml
£11.99 Incl VAT £9.99 Excl VAT Add to basket -
Oxyturbo Oxygen Refill
£27.95 Incl VAT £23.29 Excl VAT Read more -
Youngman Eco S Line Folding Timber Loft Ladder (34535000)
£289.33 Incl VAT £241.11 Excl VAT Read more -
Easy-Trim Easy Tray 1.5m Premium Felt Support Tray
£1.20 Incl VAT £1.00 Excl VAT Read more -
Bond It Silicone Ultra Waterseal – Clear 5L
£18.99 Incl VAT £15.83 Excl VAT Add to basket
Roof Felt Adhesives
Browse through our range of roof felt adhesives. At ERoofing, we stock a substantial range of high-quality felt adhesive that come in ranging sizes from 1 litre to 25 litre.
Applying Felt Adhesive
You must apply felt adhesive either using a stiff brush, mop or squeegee. To avoid thickening in cold weather, stock the felt adhesive in a warm room before — for more straightforward application.
Cromar Roofing Felt Adhesive, in particular, should be applied to the surface and left for 15 to 30 minutes (depending upon drying conditions) to develop its full thickness.
The felt should then be placed into the wet adhesive film carefully, rubbing or rolling each section down to ensure highest contact with the adhesive and to expel air trapped between the surface and the felt. Wherever possible, the felt should be unrolled into the roofing felt adhesive and rolled with a light roller (15 to 25kg).
The overlaps should be at least 75mm on the side and 150mm at the ends. To ensure a complete bond at the side and end laps, Cromar Roofing Felt Adhesive can be applied to the underside of the felt and well compacted.
When using with a timber structure, the first layer of felt must be nailed down. Successive layers of felt may then be bonded using Cromar Roofing Felt Adhesive.
When used on concrete surfaces that are porous, it will be necessary to prime the surface first, ensuring that the primer is completely dry before the first layer of felt is applied.
Twenty-four hours after laying felt, check all bondings to ensure that full adhesive has been obtained. Mainly check all laps.
