FloPlast Half Round Downpipe 112° Bend, White 
Freeflow 112mm Round Union Gutter Bracket - White 
Everbuild Fill & Skim - 5 Litre 
Armatool Slate Guillotone 
Cromar Roofing Felt Adhesive - Black 5 Litre 
Timco 30mm Cladding Pin - 250 Pieces 
ALM Code 8 Milled Lead - 360mm x 6m 
ALM Code 7 Milled Lead - 180mm x 3m 
OB1 Grip & Grab Waterproof Adhesive 
Cavity Wall Weep Extension 
Code 4 Cast Lead - 600mm x 6m 
Azpects EASYSeal Sandstone Enhancer and Sealer 5L 
FrogTape® Delicate Surface Masking Tape - Yellow 24mm x 41.1m 
Bond It Lightweight Render Mesh - 50m x 1m (Pink) 
ALM Code 4 Milled Lead - 450mm x 3m 
Bond It One Hit Wonder Lightweight Filler - White 500ml 
Ronseal uPVC Paint - White Satin 2.5L 
Everbuild Bath & Kitchen Sealant – White 290ml 
Easy-Trim End Cap Angled - Black (Box of 10) 
Bond It Gripbond Pro Max Adhesive - White EU3 
Bond It D4 Professional Wood Adhesive - Clear 1L 
Bond It Frame-Mate Door & Window Sealant - White EU3 
Everbuild P18 Gas Leak Detector - 400ml (Box of 12) 
Bond It Patination Oil 500ml 
Bond It Pro-Mate LMA Silicone - White EU3 
ALM Code 3 Milled Lead - 1600mm x 6m 
Soudal Trade All Weather Sealant - Clear 290ml 
Easy-Trim Universal Dry Verge System - Grey (Box of 50) 
Code 6 Cast Lead - 150mm x 6m Roof Felt Adhesives
Best Sellers
-
OX Spectrum Premium Diamond Blade – Mortar Raking
From: £21.99 Incl VAT £18.33 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
FreeFlow Square to Round Pipe Adaptor – White
£2.29 Incl VAT £1.91 Excl VAT Read more -
Soudal Grip ALL Solvent-Free – White 290ml (Box of 12)
£23.88 Incl VAT £19.90 Excl VAT Read more -
Corrapol-BT Aluminium Super Ridge Bar
From: £56.10 Incl VAT £46.75 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Timloc Non-Profile Tile Vent Grey (Box of 8)
£159.99 Incl VAT £133.33 Excl VAT Read more -
OX Pro Semi Round Dutch Pin, Swivel Arm – 4 Pack
£34.99 Incl VAT £29.16 Excl VAT Add to basket
Roof Felt Adhesives
Browse through our range of roof felt adhesives. At ERoofing, we stock a substantial range of high-quality felt adhesive that come in ranging sizes from 1 litre to 25 litre.
Applying Felt Adhesive
You must apply felt adhesive either using a stiff brush, mop or squeegee. To avoid thickening in cold weather, stock the felt adhesive in a warm room before — for more straightforward application.
Cromar Roofing Felt Adhesive, in particular, should be applied to the surface and left for 15 to 30 minutes (depending upon drying conditions) to develop its full thickness.
The felt should then be placed into the wet adhesive film carefully, rubbing or rolling each section down to ensure highest contact with the adhesive and to expel air trapped between the surface and the felt. Wherever possible, the felt should be unrolled into the roofing felt adhesive and rolled with a light roller (15 to 25kg).
The overlaps should be at least 75mm on the side and 150mm at the ends. To ensure a complete bond at the side and end laps, Cromar Roofing Felt Adhesive can be applied to the underside of the felt and well compacted.
When using with a timber structure, the first layer of felt must be nailed down. Successive layers of felt may then be bonded using Cromar Roofing Felt Adhesive.
When used on concrete surfaces that are porous, it will be necessary to prime the surface first, ensuring that the primer is completely dry before the first layer of felt is applied.
Twenty-four hours after laying felt, check all bondings to ensure that full adhesive has been obtained. Mainly check all laps.
