ALM Code 7 Milled Lead - 600mm x 6m 
Bond It De-Bond Mate Silicone Sealant Remover Gel - 125ml Amber/Brown 
Siroflex Trade Clearbond Adhesive Internal Use - Clear 290ml 
Premium Flashpoint Lead Sealant - Grey 
Code 6 Cast Lead - 1600mm x 3m 
Code 7 Cast Lead - 150mm x 6m 
Code 4 Cast Lead - 510mm x 3m 
ALM Code 8 Milled Lead - 180mm x 6m 
OX Tools Pro Heavy Duty Flexi Tub - 20L 
10 x Permavent Black Breather Membrane – 1m x 50m 
Soudal Sealant Remover – 400ml (Box of 12) 
Soudal Grab Solvent Based Adhesive, Beige 
Freeflow 112mm Gutter Internal Stop End - Black 
Everbuild Lumberjack 5 Minute Polyurethane Wood Adhesive Liquid – 750ml (Box of 12) 
Bond It Gripbond Pro Max Adhesive - White EU3 
Timloc Dry Fix Roll Out Ridge System Pack - Black 6m 
ALM Code 6 Milled Lead Flashing - 450mm x 6m 
Everbuild Mitre Fast Industrial Kit Superglue & Activator 
Everbuild 501 PVA - 2.5 Litre 
Timloc Universal Slate Roof Vent PVC Pipe Only 
Sikagard Woodworm Killer - 5 Litre 
Soudal Handheld Gap Filler Expanding Foam - Champagne 750ml 
Everbuild Plumbers Gold Sealant – Clear 290ml (Box of 12) 
FloPlast Square 112° Offset Downpipe - White 
Code 8 Cast Lead - 150mm x 3m Roof Felt Adhesives
Best Sellers
-
Thompson’s One Coat Concrete Seal – 5L
£54.33 Incl VAT £45.28 Excl VAT Add to basket -
Klober Profile-Line Limarech Tile Vent – Antique Red KG9859-3-0116 (Box of 10)
£215.99 Incl VAT £179.99 Excl VAT Add to basket -
ALM Code 4 Milled Lead – 360mm x 3m
£62.30 Incl VAT £51.92 Excl VAT Add to basket -
Everbuild Febond PVA – 2.5L
£14.49 Incl VAT £12.08 Excl VAT Add to basket -
Everbuild Aquaseal Liquid Roof – Slate Grey 7kg
£54.99 Incl VAT £45.83 Excl VAT Read more -
ALUKAP-XR 60mm Bar, RAL Powder Coat
From: £159.72 Incl VAT £133.10 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page
Roof Felt Adhesives
Browse through our range of roof felt adhesives. At ERoofing, we stock a substantial range of high-quality felt adhesive that come in ranging sizes from 1 litre to 25 litre.
Applying Felt Adhesive
You must apply felt adhesive either using a stiff brush, mop or squeegee. To avoid thickening in cold weather, stock the felt adhesive in a warm room before — for more straightforward application.
Cromar Roofing Felt Adhesive, in particular, should be applied to the surface and left for 15 to 30 minutes (depending upon drying conditions) to develop its full thickness.
The felt should then be placed into the wet adhesive film carefully, rubbing or rolling each section down to ensure highest contact with the adhesive and to expel air trapped between the surface and the felt. Wherever possible, the felt should be unrolled into the roofing felt adhesive and rolled with a light roller (15 to 25kg).
The overlaps should be at least 75mm on the side and 150mm at the ends. To ensure a complete bond at the side and end laps, Cromar Roofing Felt Adhesive can be applied to the underside of the felt and well compacted.
When using with a timber structure, the first layer of felt must be nailed down. Successive layers of felt may then be bonded using Cromar Roofing Felt Adhesive.
When used on concrete surfaces that are porous, it will be necessary to prime the surface first, ensuring that the primer is completely dry before the first layer of felt is applied.
Twenty-four hours after laying felt, check all bondings to ensure that full adhesive has been obtained. Mainly check all laps.
