FloPlast Square Line Downpipe Offset Bend 92.5° White – 65mm 
Code 7 Cast Lead - 210mm x 6m 
Everbuild Pro Fill - Light Grey 500g 
Everbuild EB25 Ultimate Sealant & Adhesive – Anthracite 300ml (Box of 12) 
Soudal Repair Express Plaster - White 250ml 
Thompson's Patio & Block Paving Seal - Satin 5L 
Siroflex Trade High Viscosity Superglue - 20g 
Samac Aluminium Annular Ring Nails - 1kg (70mm x 3.35mm) 
Soudal Brake Cleaner - 400ml 
Bond It Aluminium Solar Reflective Paint - Silver 5L 
Easy-Trim Ridge F Universal Dry Ridge System - 10m Kit 
80 x Hambleside Danelaw CON6+ Dry Ridge 6m Kit 
ALM Code 6 Milled Lead Flashing - 800mm x 6m 
Hambleside Danelaw TV15/7 Tile Vent - Antique Red (Box of 5) 
ALM Code 3 Milled Lead - 390mm x 3m 
Soudal 30 Minute Bond D4 PU Wood Adhesive Liquid – 750g 
Ronseal Kitchen & Bathroom Repair Kit 
Everbuild Multi-Use Monster Wonder Wipes Tub (500 Wipes) 
Estwing Roofers Pick Smooth Face Hammer - 21oz 
Code 6 Cast Lead - 1000mm x 3m 
ALM Code 8 Milled Lead - 360mm x 3m 
Thompson's Emergency Roof Seal - Black 2.5L 
Chesterfelt Shed Roofing Felt - Green Standard 10m 
FloPlast Half Round Pipe Socket, Brown 
Soudal PVCu Solvent Frame Cleaner - 1L 
Siroflex SX Contractors LMN Silicone OAK 300ml 
ALM Code 4 Milled Lead - 450mm x 3m 
Everbuild Febond PVA - 5L Roof Felt Adhesives
Best Sellers
-
Timco Anti-Slip Tape
£9.99 Incl VAT £8.33 Excl VAT Add to basket -
Everbuild Stick2 Industrial Superglue HV – Clear 50g (Box of 25)
£59.99 Incl VAT £49.99 Excl VAT Add to basket -
Bond It Power Mix Concentrated Liquid Mortar Plasticiser – 1L Brown
£8.99 Incl VAT £7.49 Excl VAT Add to basket -
Code 5 Cast Lead – 760mm x 3m
£165.65 Incl VAT £138.04 Excl VAT Add to basket -
Klober Universal Tile Vent Antique Red KG9854 (Box of 10)
£269.99 Incl VAT £224.99 Excl VAT Add to basket -
Everbuild 501 PVA – 2.5 Litre
£9.99 Incl VAT £8.33 Excl VAT Add to basket
Roof Felt Adhesives
Browse through our range of roof felt adhesives. At ERoofing, we stock a substantial range of high-quality felt adhesive that come in ranging sizes from 1 litre to 25 litre.
Applying Felt Adhesive
You must apply felt adhesive either using a stiff brush, mop or squeegee. To avoid thickening in cold weather, stock the felt adhesive in a warm room before — for more straightforward application.
Cromar Roofing Felt Adhesive, in particular, should be applied to the surface and left for 15 to 30 minutes (depending upon drying conditions) to develop its full thickness.
The felt should then be placed into the wet adhesive film carefully, rubbing or rolling each section down to ensure highest contact with the adhesive and to expel air trapped between the surface and the felt. Wherever possible, the felt should be unrolled into the roofing felt adhesive and rolled with a light roller (15 to 25kg).
The overlaps should be at least 75mm on the side and 150mm at the ends. To ensure a complete bond at the side and end laps, Cromar Roofing Felt Adhesive can be applied to the underside of the felt and well compacted.
When using with a timber structure, the first layer of felt must be nailed down. Successive layers of felt may then be bonded using Cromar Roofing Felt Adhesive.
When used on concrete surfaces that are porous, it will be necessary to prime the surface first, ensuring that the primer is completely dry before the first layer of felt is applied.
Twenty-four hours after laying felt, check all bondings to ensure that full adhesive has been obtained. Mainly check all laps.
