Bond It 5 Minute PU Wood Gel - Translucent 300ml 
Klober Thin Line Vent - Terracotta KG9855-3-0152 (Box of 10) 
Ronseal Stays White One Coat Non-Drip Paint - Matt 750ml 
Soudal 140 LQ Contact Adhesive – 5 Litre 
Code 3 Cast Lead - 180mm x 3m 
Bond It Aluminium Foil Tape - 75mm x 45M 
Soudal 30 Min D4 Gel PU Wood Adhesive Trade - 290ml Roof Felt Adhesives
Best Sellers
-
Cromar Roof Felt Adhesive – Black 2.5 Litre
£18.49 Incl VAT £15.41 Excl VAT Add to basket -
OX Pro Heavy Duty Aviation Snips Left Cut (Red)
£21.79 Incl VAT £18.16 Excl VAT Add to basket -
Easy-Trim Universal Dry Verge System – Brown (Box of 50)
£77.40 Incl VAT £64.50 Excl VAT Add to basket -
Thompson’s One Coat Damp Seal – White 250ml
£12.32 Incl VAT £10.27 Excl VAT Add to basket -
Easy-Trim Lead R Flashing Textured – 450mm x 5m
£59.65 Incl VAT £49.71 Excl VAT Add to basket -
Easy-Trim End Cap – Angled
From: £4.99 Incl VAT £4.16 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page
Roof Felt Adhesives
Browse through our range of roof felt adhesives. At ERoofing, we stock a substantial range of high-quality felt adhesive that come in ranging sizes from 1 litre to 25 litre.
Applying Felt Adhesive
You must apply felt adhesive either using a stiff brush, mop or squeegee. To avoid thickening in cold weather, stock the felt adhesive in a warm room before — for more straightforward application.
Cromar Roofing Felt Adhesive, in particular, should be applied to the surface and left for 15 to 30 minutes (depending upon drying conditions) to develop its full thickness.
The felt should then be placed into the wet adhesive film carefully, rubbing or rolling each section down to ensure highest contact with the adhesive and to expel air trapped between the surface and the felt. Wherever possible, the felt should be unrolled into the roofing felt adhesive and rolled with a light roller (15 to 25kg).
The overlaps should be at least 75mm on the side and 150mm at the ends. To ensure a complete bond at the side and end laps, Cromar Roofing Felt Adhesive can be applied to the underside of the felt and well compacted.
When using with a timber structure, the first layer of felt must be nailed down. Successive layers of felt may then be bonded using Cromar Roofing Felt Adhesive.
When used on concrete surfaces that are porous, it will be necessary to prime the surface first, ensuring that the primer is completely dry before the first layer of felt is applied.
Twenty-four hours after laying felt, check all bondings to ensure that full adhesive has been obtained. Mainly check all laps.
