Everbuild Stixall Extreme Power – Brown 290ml 
Code 4 Cast Lead - 510mm x 3m 
Everbuild P13 Plumbers Putty - Beige 750g 
Klober Adaptor For 20K Vents - KG979700 
Timloc Plain Tile Vent Red (Box of 14) 
OX Pro Wide Head End Cutting Nippers - 200mm 
Code 7 Cast Lead - 450mm x 6m 
OX Pro Tough Bucket, Blue - 15 Litre 
OX Pro Chalk Refill, White – 226g 
Siroflex Trade High Viscosity Superglue - 50g 
Freeflow Round 112mm Gutter System 135° - White 
Timloc Rad-Seal Recessed 
Timco 5 x 8m Heavy Duty Tarpaulin, Green 
Code 8 Cast Lead - 600mm x 6m 
Soudaseal Mirror Light Grey, 290ml 
OB41 Silicone Lubricant Spray 400ml 
Isoflex Liquid Rubber - 4.5L 
Easy-Trim Universal Dry Verge System Terracotta (Box of 50) 
Restec GRPROOF 1010 Base Coat Resin - 20kg 
Code 6 Cast Lead - 600mm x 3m 
Everbuild Stixall Extreme Power - White 290ml (Box of 12) 
Bora Workhorse Single Piece Stand with Folding Legs PM-3350 
Everbuild Everflex Pyro Mate Fire Rated Silicone – White 295ml 
Everbuild Standard Nozzle - 6 Pack (290mm & 310mm) 
D4 Wood Adhesive – 1 Litre 
Bond It Aluminium Foil Tape - 75mm x 45M 
Ronseal Exterior Yacht Varnish - Gloss 2.5L 
Everbuild Everflex Mirror Mate Adhesive - White 290ml 
Code 5 Cast Lead - 1200mm x 3m Roof Felt Adhesives
Best Sellers
-
Timco Cloth Tape White – 50m x 48mm
£8.29 Incl VAT £6.91 Excl VAT Add to basket -
Everbuild 206 Strike Release Oil – 5 Litre
£18.99 Incl VAT £15.83 Excl VAT Add to basket -
Timloc Double Pantile Tile Vent Red (Box of 6)
£119.88 Incl VAT £99.90 Excl VAT Add to basket -
OX Tools Pro PolyZip 4 Piece Cutter Set – (15, 22, 35, 42mm)
£64.99 Incl VAT £54.16 Excl VAT Add to basket -
Everbuild Oil Away Sprayable – 1 Litre
£8.99 Incl VAT £7.49 Excl VAT Read more -
Easy-Trim Over Fascia Vent – 25mm x 1m
£4.50 Incl VAT £3.75 Excl VAT Add to basket
Roof Felt Adhesives
Browse through our range of roof felt adhesives. At ERoofing, we stock a substantial range of high-quality felt adhesive that come in ranging sizes from 1 litre to 25 litre.
Applying Felt Adhesive
You must apply felt adhesive either using a stiff brush, mop or squeegee. To avoid thickening in cold weather, stock the felt adhesive in a warm room before — for more straightforward application.
Cromar Roofing Felt Adhesive, in particular, should be applied to the surface and left for 15 to 30 minutes (depending upon drying conditions) to develop its full thickness.
The felt should then be placed into the wet adhesive film carefully, rubbing or rolling each section down to ensure highest contact with the adhesive and to expel air trapped between the surface and the felt. Wherever possible, the felt should be unrolled into the roofing felt adhesive and rolled with a light roller (15 to 25kg).
The overlaps should be at least 75mm on the side and 150mm at the ends. To ensure a complete bond at the side and end laps, Cromar Roofing Felt Adhesive can be applied to the underside of the felt and well compacted.
When using with a timber structure, the first layer of felt must be nailed down. Successive layers of felt may then be bonded using Cromar Roofing Felt Adhesive.
When used on concrete surfaces that are porous, it will be necessary to prime the surface first, ensuring that the primer is completely dry before the first layer of felt is applied.
Twenty-four hours after laying felt, check all bondings to ensure that full adhesive has been obtained. Mainly check all laps.
