Soudal Fix ALL High Tack – Brown 290ml (Box of 12) 
Bond It Stain Block - 400ml Off White 
Everbuild Lumberjack 5 Minute Wood Adhesive Deal 
FloPlast Square Line Gutter 90° Black – 114mm 
OX Trade 14 Drive Socket Set - 35 Piece 
Timloc Double Pantile Tile Vent Grey (Box of 6) 
Everbuild Opti-Mix Mortar Plasticiser - 1 Litre (Box of 12) 
Bond It PVA & Adhesive Sealer - White 2.5kg 
Everbuild Feb® Rendamix - 5L Amber 
Timco Bulk Pallet 50 Packs - Classic Multi-Purpose Screws 4.0 x 50 Double Countersunk - A2 Stainless Steel - 200 Box 
Code 7 Cast Lead - 300mm x 3m 
201 Mortar Admix – 5 Litre 
Soudal Grab Solvent Based Adhesive, Beige 
Timco Precision Screwdriver Set 6pcs 
ALM Code 5 Milled Lead - 210mm x 6m 
OX Pro Grout Remover Replacement Blades 50mm - Pack 2 
Code 8 Cast Lead - 850mm x 6m 
ALM Code 3 Milled Lead - 600mm x 3m 
Ronseal Ultra Tough Hardglaze Clear Varnish - 750ml 
Cromar Bitumen Trowel Mastic - Black 1L 
ALM Code 8 Milled Lead - 390mm x 6m 
Soudal Handheld Gap Filler Expanding Foam - Champagne 750ml 
Bostik Flashband Self Adhesive Flashing Tape – Grey 3.75m x 75mm 
Code 6 Cast Lead - 510mm x 3m 
FloPlast Half Round Pipe Socket, Brown 
Ronseal Multi Purpose Smooth Finish Filler - 1.2kg + 50% Free Roof Felt Adhesives
Best Sellers
-
Timloc 3014C Over Fascia Ventilation System 1M – Black
£9.39 Incl VAT £7.83 Excl VAT Add to basket -
Everbuild General Purpose Silicone – Clear 280ml (Box of 12)
£42.84 Incl VAT £35.70 Excl VAT Add to basket -
Everbuild PinkGrip MS – 290ml (Box of 12)
£49.92 Incl VAT £41.60 Excl VAT Read more -
OX Spectrum Trade XL 3 Core & Accessories Set
£99.95 Incl VAT £83.29 Excl VAT Add to basket -
Everbuild Jumbo Mitre Fast Kit Superglue & Activator
£10.79 Incl VAT £8.99 Excl VAT Add to basket -
Everbuild Anchorset Green 150 – Grey 150ml
£6.99 Incl VAT £5.83 Excl VAT Add to basket
Roof Felt Adhesives
Browse through our range of roof felt adhesives. At ERoofing, we stock a substantial range of high-quality felt adhesive that come in ranging sizes from 1 litre to 25 litre.
Applying Felt Adhesive
You must apply felt adhesive either using a stiff brush, mop or squeegee. To avoid thickening in cold weather, stock the felt adhesive in a warm room before — for more straightforward application.
Cromar Roofing Felt Adhesive, in particular, should be applied to the surface and left for 15 to 30 minutes (depending upon drying conditions) to develop its full thickness.
The felt should then be placed into the wet adhesive film carefully, rubbing or rolling each section down to ensure highest contact with the adhesive and to expel air trapped between the surface and the felt. Wherever possible, the felt should be unrolled into the roofing felt adhesive and rolled with a light roller (15 to 25kg).
The overlaps should be at least 75mm on the side and 150mm at the ends. To ensure a complete bond at the side and end laps, Cromar Roofing Felt Adhesive can be applied to the underside of the felt and well compacted.
When using with a timber structure, the first layer of felt must be nailed down. Successive layers of felt may then be bonded using Cromar Roofing Felt Adhesive.
When used on concrete surfaces that are porous, it will be necessary to prime the surface first, ensuring that the primer is completely dry before the first layer of felt is applied.
Twenty-four hours after laying felt, check all bondings to ensure that full adhesive has been obtained. Mainly check all laps.
