FloPlast Square Union Unit - White 
FloPlast Half Round Line Pipe Socket, White 
Freeflow 112mm Round Gutter System Stopend Outlet - White 
Klober Uni Angle Ridge End Cap, Black 
OX Pro OX-P133855 Easy Start Handsaw 550mm / 22in 
Code 8 Cast Lead - 800mm x 3m 
Code 7 Cast Lead - 300mm x 6m 
Bond It Incredibond Solvent Free Adhesive - White 310ml 
Bond It Mega Foam Gun/Aerosol PU Expanding Foam - Beige 500ml 
Ronseal One Coat Water-Based Tile Paint - White Satin 750ml 
Code 3 Cast Lead - 210mm x 3m 
OX Tools Winter Set - Beanie, Socks, Thermal Gloves 
Everbuild Black Jack 906 Bitumen Roofing Emulsion – 5 Litre 
FloPlast Square Line Gutter Angle 135° White 
Freeflow 68mm Round Gutter Drain Pipe 112° Branch - White 
Timloc Plain & Interlocking Tile Vent Adapter 
Timloc Over Fascia Vent - 1m Roof Felt Adhesives
Best Sellers
-
Ronseal 10 Year Weatherproof Wood Paint (2 in 1 Formula) – Satin 750ml
From: £14.86 Incl VAT £12.38 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
ALM Code 7 Milled Lead – 150mm x 6m
£90.62 Incl VAT £75.52 Excl VAT Add to basket -
IKOflash Lead Free Flashing
From: £43.95 Incl VAT £36.63 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Siroflex Trade Hand Held PU Expanding Foam
£12.59 Incl VAT £10.49 Excl VAT Add to basket -
OB41 Multi-Use Brake Cleaner – 400ml
£10.89 Incl VAT £9.08 Excl VAT Add to basket -
JCB Horton Hoodie Navy
From: £22.90 Incl VAT £19.09 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page
Roof Felt Adhesives
Browse through our range of roof felt adhesives. At ERoofing, we stock a substantial range of high-quality felt adhesive that come in ranging sizes from 1 litre to 25 litre.
Applying Felt Adhesive
You must apply felt adhesive either using a stiff brush, mop or squeegee. To avoid thickening in cold weather, stock the felt adhesive in a warm room before — for more straightforward application.
Cromar Roofing Felt Adhesive, in particular, should be applied to the surface and left for 15 to 30 minutes (depending upon drying conditions) to develop its full thickness.
The felt should then be placed into the wet adhesive film carefully, rubbing or rolling each section down to ensure highest contact with the adhesive and to expel air trapped between the surface and the felt. Wherever possible, the felt should be unrolled into the roofing felt adhesive and rolled with a light roller (15 to 25kg).
The overlaps should be at least 75mm on the side and 150mm at the ends. To ensure a complete bond at the side and end laps, Cromar Roofing Felt Adhesive can be applied to the underside of the felt and well compacted.
When using with a timber structure, the first layer of felt must be nailed down. Successive layers of felt may then be bonded using Cromar Roofing Felt Adhesive.
When used on concrete surfaces that are porous, it will be necessary to prime the surface first, ensuring that the primer is completely dry before the first layer of felt is applied.
Twenty-four hours after laying felt, check all bondings to ensure that full adhesive has been obtained. Mainly check all laps.
