Code 7 Cast Lead - 300mm x 6m 
Code 5 Cast Lead - 600mm x 6m 
Klober Profile-Line Twin Plain Tile Vent - Brown KG9861-0247 (Box of 10) 
ALM Code 6 Milled Lead Flashing - 850mm x 3m 
Everbuild Everflex AquaMate Aquarium Sealant – Translucent 295ml (Box of 12) 
Ronseal Exterior Multi-Purpose Smooth Finish Filler - Grey 330g 
Klober Profile-Line Flat Tile Vent - Brown KG9856-3-0247 (Box of 10) 
Cromar Vent 3 Light Breathable Membrane - 1m x 25m 
Code 8 Cast Lead - 1000mm x 6m 
Ronseal Ultra Tough Hardglaze Clear Varnish - 750ml 
Everbuild Clear Fix – 290ml (Box of 12) 
Bond It 5 Minute PU Wood Gel Translucent 300ml - Box of 12 
ALM Code 4 Milled Lead - 600mm x 6m 
Bond It Bitumen Primer - Black 5L 
OX Polyzip Flex C2 Cutter - 25mm to 55mm 
Everbuild Maximum Torque - White 290ml (Box of 12) 
OX Pro Impact Bit Set - 11 Piece 
Bond It Bath Mate Bath & Kitchen Sealant - White EU3 
Hedgehog Gutterbrush Clips (Pack of 20) 
FloPlast Square Gutter 90° Bend - White 
Everflex Premium+ 450 Builders Silicone – Translucent 300ml (Box of 25) Flashing Tape
Best Sellers
-
Ronseal One Coat Stays White Radiator Paint – Gloss 750ml
£21.99 Incl VAT £18.33 Excl VAT Add to basket -
OX Speedskim Semi Flexible Plastering Rule
From: £40.49 Incl VAT £33.74 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Restec Flexitec 2020 Resin – 20kg (Dark Grey)
£185.99 Incl VAT £154.99 Excl VAT Read more -
ALM Code 5 Milled Lead – 1600mm x 3m
£345.50 Incl VAT £287.92 Excl VAT Add to basket -
Code 3 Cast Lead – 180mm x 6m
£45.70 Incl VAT £38.08 Excl VAT Add to basket -
Code 6 Cast Lead – 210mm x 3m
£54.26 Incl VAT £45.22 Excl VAT Add to basket
Flashing Tape
Roofing flashing tape, also known as flashband or lead flashing tape, is one of many ways to protect, repair, and watertight seal something permanently. Due to its heat resistance and ability to provide an immediate watertight seal on an enormous variety of surfaces, it is an essential part of any roofing project. In addition, it comes in multiple sizes to suit your roof needs.Â
Among our range, we have the excellent Cromar Flashing Tape, Bostik Flashing Tape and Everbuild’s flashing trade tape.
How To Apply Flashing Tape the Correct Way
To help out, here is a short guide on how to apply flashing tape.
Cut the Flashing Strip to the length required. To avoid any creasing, remove approximately 50mm of backing paper and carefully position the sealing strip. Hold the backing paper firmly and release it steadily from the sealing strip as the product is applied.
Smooth into position using hand pressure. Use a seam roller or rounded wood smooth to ensure good contact and expel any air, especially on overlaps and at the edges. When laying adjacent rolls, Flashing Strip should be overlapped by a minimum of 25mm for a watertight seal.Â
The seam must be pressed firmly with a hand roller paying particular attention at the point of overlap. Remember, if applying this in cold weather (5-15 Celsius), storing the flashing tape in a warm place is highly recommended before use. If possible, it is also suggested to warm up the surface slightly.
