Bond It Mould Stop - Clear 1L 
Timloc Castellated Tile Vent Grey (Box of 8) 
Soudal Bathroom & Kitchen Silicone - Clear 290ml (Box of 12) 
FloPlast Half Round Gutter Union, White 
Easy-Trim End Cap Half Round - Black (Box of 10) 
Easy-Trim Lead R Flashing Textured – 600mm x 5m 
OX Pro Brick Hammer - 24 oz 
Code 7 Cast Lead - 450mm x 3m 
Samac Aluminium Annular Ring Nails - 1kg (38mm x 3.35mm) 
Everbuild Everflex 200 Contractors LMA Silicone - Brown 295ml 
Roofer Doofer – The Ultimate Roofing Tool 
Hambleside Danelaw TV15/7 Tile Vent - Brown (Box of 5) 
Hambleside Danelaw Single Pantile Roof Tile Vent, TV10/8 - Terracotta (Box of 5) 
Soudal PVCu Solvent Frame Cleaner - 1L (Box of 12) 
Soudal Superglue Activator - 200ml 
ALM Code 3 Milled Lead - 850mm x 3m 
ALM Code 7 Milled Lead - 1200mm x 3m 
ALM Code 6 Milled Lead Flashing - 510mm x 3m 
Timco Timber Frame Screw - Wafer Green (6.7 x 60) Box of 50 
Code 6 Cast Lead - 1000mm x 3m 
ALM Code 8 Milled Lead - 1600mm x 3m 
Soudafoam Gap Filler Genius Gun - 600ml Flashing Tape
Best Sellers
-
Soudal Genius Gun Plasterboard Adhesive – 750ml (Box of 12)
£75.00 Incl VAT £62.50 Excl VAT Add to basket -
Everbuild Creocote – 4 Litre
From: £19.99 Incl VAT £16.66 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
ALM Code 4 Milled Lead – 240mm x 6m
£82.13 Incl VAT £68.44 Excl VAT Add to basket -
Hambleside Danelaw TV15/4 Tile Vent – Slate Grey (Box of 5)
£114.99 Incl VAT £95.83 Excl VAT Add to basket -
Soudal Repair Express Cement – Grey 900ml
£9.99 Incl VAT £8.33 Excl VAT Add to basket -
Everflex Premium+ 450 Builders Silicone – Black 300ml (Box of 25)
£132.50 Incl VAT £110.42 Excl VAT Read more
Flashing Tape
Roofing flashing tape, also known as flashband or lead flashing tape, is one of many ways to protect, repair, and watertight seal something permanently. Due to its heat resistance and ability to provide an immediate watertight seal on an enormous variety of surfaces, it is an essential part of any roofing project. In addition, it comes in multiple sizes to suit your roof needs.Â
Among our range, we have the excellent Cromar Flashing Tape, Bostik Flashing Tape and Everbuild’s flashing trade tape.
How To Apply Flashing Tape the Correct Way
To help out, here is a short guide on how to apply flashing tape.
Cut the Flashing Strip to the length required. To avoid any creasing, remove approximately 50mm of backing paper and carefully position the sealing strip. Hold the backing paper firmly and release it steadily from the sealing strip as the product is applied.
Smooth into position using hand pressure. Use a seam roller or rounded wood smooth to ensure good contact and expel any air, especially on overlaps and at the edges. When laying adjacent rolls, Flashing Strip should be overlapped by a minimum of 25mm for a watertight seal.Â
The seam must be pressed firmly with a hand roller paying particular attention at the point of overlap. Remember, if applying this in cold weather (5-15 Celsius), storing the flashing tape in a warm place is highly recommended before use. If possible, it is also suggested to warm up the surface slightly.
